Window Deflector Install | Volvo XC60

Introduction

In this tutorial, we will guide you through the installation of wind deflectors on a 2019 Volvo XC60. Wind deflectors enhance your driving experience by allowing fresh air into the cabin while protecting against rain and reducing wind noise. This step-by-step guide will help you successfully install the deflectors with ease.

Step 1: Gather Your Materials

Before starting the installation, make sure you have the following items ready:

• Wind deflector kit (should include four pieces: front right, front left, rear right, rear left)
• Cleaning supplies (isopropyl alcohol or a suitable cleaner, microfiber cloth)
• 3M tape (usually pre-installed on the deflectors)

Step 2: Clean the Installation Area

Proper preparation is crucial for ensuring the adhesive sticks well.

• Use isopropyl alcohol to thoroughly clean the area on the door where the deflectors will be installed.
• Wipe the surface with a microfiber cloth to remove dust and grease.

Step 3: Unbox the Wind Deflectors

Carefully unbox the wind deflectors and inspect each piece for any damage.

• Identify the front right and front left pieces.
• Note that the installation will begin with the driver’s side (front left).

Step 4: Position the Deflector

• Align the deflector with the notches on the door frame.
• Ensure the deflector fits snugly against the body of the vehicle.

Step 5: Remove the 3M Tape Backing

• Once you have the deflector positioned correctly, peel off the backing from the 3M tape.
• Avoid touching the adhesive to keep it clean.

Step 6: Press and Secure the Deflector

• Firmly press the deflector onto the cleaned surface.
• Ensure it adheres well and sits flush against the door frame to minimize wind noise and improve aerodynamics.

Step 7: Repeat for Other Deflectors

• Follow the same steps for the remaining deflectors (front right, rear left, rear right).
• Take your time to ensure each piece is properly installed.

Practical Tips

• If you encounter resistance while lowering the windows after installation, check to ensure the deflector is not protruding too much.
• It’s advisable to let the adhesive cure for at least 24 hours before exposing it to rain or washing the vehicle.

Common Pitfalls to Avoid

• Avoid installing the deflectors in direct sunlight or extreme temperatures, as this can affect the adhesive.
• Ensure the installation area is free of dirt and moisture for optimal adhesion.

Conclusion

Congratulations on installing your wind deflectors! These additions not only enhance your vehicle’s aesthetics but also improve comfort by allowing fresh air circulation even during rainy days. For best results, consider combining them with sunshades for a cooler cabin. Enjoy your driving experience with the new deflectors, and check back for more useful car modifications and tips!