Teradek Serv Pro: Link Multiple Serv Pros Together with a Link

Introduction

This tutorial will guide you through the process of linking multiple Teradek Serv Pros together using the Teradek Link. By creating a local network, you can enhance your streaming capabilities, achieving a range of up to 1000 feet. This setup allows you to stream live HD video from your camera to multiple devices seamlessly.

Step 1: Set Up Your Teradek Serv Pro

• Unbox the Teradek Serv Pro and ensure you have all the necessary components.
• Connect your Serv Pro to the video source (camera, video switcher, or DIT cart) using either the HDMI or 3G-SDI input.
• Power on the Serv Pro and wait for it to boot up fully.

Step 2: Connect the Teradek Link

• Power on the Teradek Link device.
• Using an Ethernet cable, connect the Link to the Serv Pro. This cable will facilitate the local network connection between multiple Serv Pros.
• Make sure both devices are connected to the same power source or are properly powered to avoid interruptions.

Step 3: Configure the Network

• Access the setup interface for the Link via a web browser on a connected device.
• Ensure the network settings are correctly configured:
  • Choose the appropriate IP settings (static or DHCP).
  • Confirm that the devices are on the same network subnet.
• Save the settings and restart the devices if necessary.

Step 4: Link Additional Serv Pros

• Repeat Steps 1 to 3 for each additional Serv Pro you want to link.
• Ensure that each Serv Pro is connected to the Link device via Ethernet.
• Check that all Serv Pros are recognized in the Link’s setup interface.

Step 5: Test the Configuration

• On a connected device (iOS/Android or MacOS), open the streaming application compatible with the Serv Pro.
• Stream a video feed from the primary Serv Pro and ensure the stream is accessible on other devices.
• Check for video and audio synchronization (aim for a delay of just 2 frames).

Conclusion

By following these steps, you can successfully link multiple Teradek Serv Pros together using the Teradek Link, creating a robust local network for HD video streaming. This setup is ideal for various environments, including film sets, live events, and remote broadcasts. For further information on the Serv Pro or Link, visit Teradek’s official website. Happy streaming!