How to Replace Fuel Pump 2009-2014 Ford F-150

Introduction

This tutorial provides a comprehensive guide on how to replace the fuel pump in a 2009-2014 Ford F-150. A functioning fuel pump is crucial for the proper operation of your vehicle's combustion engine, as it delivers the necessary fuel. If you're experiencing issues with your vehicle’s performance or fuel gauge, this step-by-step guide will help you install a new fuel pump assembly.

Step 1: Gather Required Tools and Materials

Before starting the replacement, ensure you have all necessary tools and materials ready:

• Pocket Screwdriver
• Pry Bar
• 13mm Socket
• 7mm Socket
• Trim Tool Set
• Pliers
• 3/8 Inch Impact Gun
• Socket Extensions
• Gloves
• Rust Penetrant
• Safety Glasses
• Brass Punch
• Hammer
• New Fuel Pump Module Assembly

Step 2: Prepare the Vehicle

1. Safety Precautions:

   • Park your F-150 on a flat surface and engage the parking brake.
   • Wear safety glasses and gloves to protect yourself during the process.

2. Disconnect the Battery:

   • Open the hood and disconnect the negative terminal of the battery to prevent any electrical shorts.

Step 3: Access the Fuel Pump

1. Remove the Fuel Tank:

   • Depending on your vehicle setup, you may need to lower the fuel tank. Use the 13mm socket to remove bolts securing the tank.
   • It may be helpful to use rust penetrant on stubborn bolts.

2. Disconnect Fuel Lines:

   • Carefully disconnect the fuel lines from the fuel pump assembly. Use a pocket screwdriver to release any clips holding the lines in place.

3. Remove the Fuel Pump Assembly:

   • Use the appropriate sockets to remove the bolts securing the fuel pump assembly.
   • If necessary, use a pry bar to gently lift the assembly out of the tank.

Step 4: Install the New Fuel Pump

1. Prepare the New Pump:

   • Compare the new fuel pump module with the old one to ensure compatibility.
   • If applicable, transfer any necessary components from the old pump to the new one.

2. Insert the New Pump:

   • Carefully place the new fuel pump assembly into the fuel tank.
   • Ensure it is seated properly and secure it using the original bolts.

3. Reconnect Fuel Lines:

   • Reattach the fuel lines to the new pump, ensuring they are secure and free from leaks.

Step 5: Reassemble the Fuel Tank

1. Raise the Fuel Tank:

   • If you lowered the tank, carefully lift it back into place and secure it with the previously removed bolts.

2. Reconnect the Battery:

   • Once everything is secured, reconnect the negative battery terminal.

Step 6: Test the Installation

1. Start the Vehicle:

   • Turn the ignition to the "On" position without starting the engine to prime the fuel system.
   • Check for any leaks around the fuel pump assembly.

2. Check Fuel Gauge and Performance:

   • Start the engine and monitor performance. Ensure the fuel gauge functions correctly.

Conclusion

Replacing the fuel pump in your 2009-2014 Ford F-150 can improve vehicle performance and ensure accurate fuel gauge readings. Following these steps will help you successfully complete the installation. If you encounter any issues, consider consulting a professional mechanic. Remember to dispose of any old parts and fluids properly. Happy driving!