Wie OPEL VIVARO A Kombi Bremssattel und -träger hinten wechseln [AUTODOC TUTORIAL]

Introduction

This tutorial provides a step-by-step guide for replacing the rear brake caliper and caliper bracket on an Opel Vivaro A (2006–2014). Proper maintenance of your vehicle’s braking system is crucial for safety and performance. Following these steps will help you accomplish this task effectively.

Step 1: Prepare for the Replacement

• Gather necessary tools and materials:
  • New brake caliper and caliper bracket
  • WD-40 penetrating oil
  • LIQUI MOLY quick cleaner
  • LIQUI MOLY assembly paste
  • Basic hand tools (socket set, wrenches, etc.)
• Ensure the vehicle is parked on a flat surface and secure it with wheel chocks.
• Wear safety gloves and goggles for protection.

Step 2: Remove the Brake Fluid Reservoir Cap

• Locate the brake fluid reservoir under the hood.
• Carefully remove the cap to relieve any pressure in the system. This will help prevent spills when you remove the caliper.

Step 3: Remove the Brake Caliper

• Use a socket or wrench to loosen and remove the bolts securing the brake caliper to the bracket.
• Gently slide the caliper off the brake rotor. If it’s stuck, use some WD-40 to help loosen it.

Step 4: Remove the Caliper Bracket

• With the caliper removed, you’ll see the caliper bracket.
• Remove the bolts holding the caliper bracket in place using the appropriate socket or wrench.
• Take off the bracket and set it aside.

Step 5: Install the New Caliper Bracket

• Position the new caliper bracket in place.
• Secure it with the bolts you previously removed, ensuring they are tightened to the manufacturer's specifications.

Step 6: Install the New Brake Caliper

• Carefully slide the new brake caliper onto the newly installed bracket.
• Align it correctly and secure it with the bolts. Make sure they are tightened properly.

Step 7: Bleed the Brake System

• To remove air from the brake lines, press the brake pedal several times.
• This will help seat the caliper pistons and push fluid through the system.

Step 8: Check Brake Fluid Level

• After bleeding the brakes, check the brake fluid level in the reservoir.
• If necessary, top it off with the appropriate brake fluid to ensure optimal performance.

Conclusion

Replacing the rear brake caliper and caliper bracket on an Opel Vivaro A is a manageable task if you follow these steps carefully. Always ensure safety by using the right tools and protective gear. After completing the replacement, consider taking your vehicle for a short test drive to confirm everything is functioning correctly. Regular maintenance of your vehicle’s braking system is essential for safety on the road.