How To Replace Washing Machine Control Board GE

Introduction

This tutorial provides a step-by-step guide on how to replace the control board in a GE washing machine. If your washing machine is not turning on or exhibiting erratic behavior, the control board may be the culprit. Replacing it can restore functionality and save you from costly repairs.

Step 1: Gather Necessary Tools and Materials

Before starting the replacement process, ensure you have the following tools and parts ready:

• Screwdriver (flathead and Phillips)
• Replacement control board (part # WH22X37837)
• Multimeter (optional for testing)
• Safety gloves
• Work surface or mat

Step 2: Unplug the Washing Machine

Safety is paramount. Follow these steps to ensure you work safely:

• Locate the power cord of your washing machine.
• Unplug the machine from the electrical outlet to avoid any risk of electric shock.

Step 3: Access the Control Board

To replace the control board, you need to access it:

1. Remove the top panel:

   • Use your screwdriver to unscrew the screws securing the top panel.
   • Gently lift the panel off and set it aside.

2. Locate the control board:

   • The control board is typically found at the back of the machine or under the top panel.

Step 4: Disconnect the Old Control Board

Carefully remove the old control board to prepare for the new one:

1. Take a picture of the wiring configuration for reference.

2. Disconnect the wires:

   • Carefully unplug each wire connected to the control board.
   • Use your picture as a guide to ensure correct reconnection later.

3. Unscrew the control board:

   • Remove any screws holding the control board in place.
   • Gently lift it out of its housing.

Step 5: Install the New Control Board

Now it's time to put in the new control board:

1. Place the new control board into the housing.
2. Secure it with screws to keep it in place.
3. Reconnect the wires according to your reference picture:
   • Ensure each wire is firmly connected to its corresponding terminal.

Step 6: Reassemble the Washing Machine

Once the new control board is installed, you can reassemble the machine:

1. Replace the top panel:

   • Align it correctly and secure it with screws.

2. Double-check all connections:

   • Ensure that there are no loose wires or parts.

Step 7: Test the Washing Machine

With the installation complete, it's time to test if the replacement was successful:

1. Plug the washing machine back into the electrical outlet.

2. Turn on the machine:

   • Check if it powers on and runs through cycles without issues.

3. If there are still problems:

   • Consider consulting a professional, as there may be other underlying issues.

Conclusion

Replacing the control board in a GE washing machine is a manageable task that can restore its functionality. Remember to always prioritize safety by unplugging the machine and using appropriate tools. If you encounter difficulties, don’t hesitate to seek professional help. Now that you've successfully completed the replacement, enjoy your fully functioning washing machine!