Como fazer PIPA TRADICIONAL COMPLETA Armação, Estirante, Rabiola / BRASIL

Introduction

This tutorial will guide you through the process of making a traditional kite, known as "pipa," using simple materials. The steps include crafting the frame, creating the bridle (estirante), and adding the tail (rabiola). Making kites is a fun outdoor activity that can bring back childhood memories and provide enjoyment for all ages.

Step 1: Gather Your Materials

Before you begin, make sure you have the following materials ready:

• Lightweight paper (such as "ceda")
• Wooden dowels or bamboo sticks (for the frame)
• String (for the bridle)
• Scissors
• Glue or tape
• Ruler
• Marker or pencil

Practical Tips

• Choose a windy day for flying your kite after completion.
• Use recycled materials whenever possible.

Step 2: Create the Kite Frame

1. Measure and Cut the Sticks

   • Cut two wooden dowels: one longer (vertical) and one shorter (horizontal).
   • Typical measurements are around 1 meter for the vertical stick and 70 cm for the horizontal stick.

2. Assemble the Frame

   • Lay the longer stick vertically.
   • Position the shorter stick horizontally, approximately one-third from the top of the vertical stick.
   • Use glue or tape to secure the intersection.

3. Reinforce the Structure

   • Add extra glue at the joints for additional strength.
   • Allow the frame to dry completely.

Step 3: Attach the Paper to the Frame

1. Cut the Paper

   • Cut a piece of lightweight paper large enough to cover the frame with extra edges for folding over.

2. Glue the Paper

   • Lay the frame on the paper.
   • Fold the paper over the edges of the frame and glue or tape it down securely.

3. Trim Excess Paper

   • Once the glue has dried, trim any excess paper around the edges to keep it neat.

Step 4: Create the Bridle

1. Cut the String

   • Cut a piece of string about 1.5 times the length of the vertical stick.

2. Attach the Bridle

   • Tie one end of the string to the top of the vertical stick and the other end to the intersection point of the vertical and horizontal sticks.
   • Ensure the string is tight but not overly stretched.

Common Pitfalls to Avoid

• Make sure the bridle is secure; a loose bridle can affect the kite's ability to fly.

Step 5: Add the Tail

1. Cut the Rabiola

   • Cut a length of string or additional paper for the tail, about 2 to 3 meters long.

2. Attach the Tail

   • Tie or glue the tail to the bottom of the vertical stick.
   • This will help stabilize the kite during flight.

Conclusion

You have now created a traditional kite ready for flying! Remember to choose a windy day for the best flying experience. Enjoy the process of making and flying your kite, and don't hesitate to experiment with different designs and colors. Happy flying!