How to make multipurpose liquid soap at home| 20Litres liquid soap using N4500

Introduction

In this tutorial, you'll learn how to make multipurpose liquid soap at home using a few basic ingredients. This homemade liquid soap can be used for various cleaning tasks, such as washing dishes, cars, clothes, and countertops. Not only is it cost-effective—costing around N4500 for a 20-litre batch—but it's also rewarding to create your own cleaning products.

Step 1: Gather Your Ingredients and Equipment

Before you start, collect all the necessary ingredients and equipment. Here’s what you will need:

Ingredients

• 100g Nitrosol (thickener)
• 200g Soda Ash (alkaline agent)
• 200g Caustic Soda (saponification agent)
• 550g Sulphonic Acid (cleaning agent)
• 100g Texapon (foaming agent)
• 100g SLS (Sodium Lauryl Sulfate, foaming agent)
• 52g STPP (Sodium Tripolyphosphate, cleaning agent)
• 20g Fragrance (your choice)
• 20g Color (your choice)
• 300g Water
• 20L Clean Water

Equipment

• Large plastic bucket (20L capacity)
• Wooden stirring stick or spatula
• Protective gear (gloves and mask)

Step 2: Prepare Your Workspace

Ensure your workspace is clean and well-ventilated. Put on your gloves and mask to protect yourself from the chemicals.

Step 3: Measure and Prepare Water

• Fill your large bucket with 20 litres of clean water.
• Set aside 4 litres of water for later use.

Step 4: Mix the Ingredients

Follow this sequence to add ingredients to the water:

1. Nitrosol: Add 100g of Nitrosol to the 16L of water. Stir continuously until it dissolves completely.
2. Soda Ash and Caustic Soda:
   • First, add 200g of Soda Ash. Stir until fully dissolved.
   • Then add 200g of Caustic Soda while stirring continuously.
3. STPP: Add 52g of Sodium Tripolyphosphate. Stir until dissolved.
4. SLS: Add 100g of SLS. Continue stirring until it dissolves.
5. Texapon: Add 550g of Texapon, mixing thoroughly to ensure it incorporates well.
6. Foam Booster: If applicable, add any additional foam booster to enhance foaming.

Step 5: Add Remaining Ingredients

• From the 4 litres set aside, add 100g of Sulphonic Acid, and mix well.
• Add 20g of Fragrance and 20g of Color, stirring until fully blended.

Step 6: Set Aside the Mixture

After combining all ingredients, let the mixture sit for at least 48 hours. This allows the ingredients to fully react and the soap to thicken properly.

Step 7: Store Your Liquid Soap

Once the 48 hours have passed:

• Check the mixture to ensure all ingredients are dissolved and the soap is consistent.
• Use a funnel to pour the liquid soap into smaller containers for easy storage and use.

Conclusion

Congratulations! You've successfully made multipurpose liquid soap at home. This soap can be used for various cleaning tasks, and the process is simple and cost-effective. Store your liquid soap in a cool, dry place and enjoy your homemade cleaning solution. Don't forget to share your experience and any tips you discover along the way!