Instalación PASO A PASO de dos focos con interruptor doble

Introduction

This tutorial will guide you through the step-by-step process of installing two LED light bulbs connected to a double switch. This basic electrical installation is essential for managing light control in your home efficiently. Following this guide will help you ensure a safe and effective setup.

Step 1: Gather Materials

Before you begin, make sure you have all the necessary materials. You will need:

• 1 Double switch (10A, 250V)
• 2 LED bulbs (9W)
• 2 Light sockets (6A, 250V)
• 1 Thermal magnetic switch (10A)
• 14 AWG cable (7 strands)
• Black electrical tape

Step 2: Turn Off Power

Safety is paramount. Before starting any electrical work, ensure that the power supply to the circuit you will be working on is turned off. Locate the breaker that controls the circuit and flip it to the 'off' position.

Step 3: Install the Light Sockets

1. Choose the locations for your light sockets.
2. Use a drill to make holes for the sockets if necessary.
3. Secure the light sockets in place using screws.

Step 4: Connect the Wiring

1. Prepare the 14 AWG cable:

   • Cut the cable to the desired length for your installation.
   • Strip the insulation off the ends of the wires (about 1 inch).

2. Wiring the sockets:

   • Connect the live (black) wire from the power source to the common terminal of the double switch.
   • Connect the wires from the double switch to each light socket. The wiring should look like this:
     • From the double switch to the first socket (live wire).
     • From the first socket to the second socket (parallel connection).
   • Connect the neutral (white) wire from the power source directly to each light socket.

3. Grounding:

   • If applicable, connect the ground wires to the grounding screws on the sockets and switch.

Step 5: Install the Double Switch

1. Mount the double switch into the electrical box.
2. Ensure that all connections are tight and secure.
3. Cover the switch with a faceplate.

Step 6: Test the Installation

1. Turn the power back on at the breaker.
2. Test the double switch to ensure both light bulbs are functioning properly.
3. If either bulb doesn't turn on, check your connections and ensure that the bulbs are securely placed in their sockets.

Conclusion

Congratulations on successfully installing your double switch and LED bulbs! Always remember to prioritize safety by turning off the power before starting any electrical work. For future projects, consider exploring more complex electrical installations or upgrades. Remember to consult a professional electrician if you have any uncertainties or if your project involves more complicated wiring.