How to program Toyota Camry 2012-2020 Remote Key: Autel IM508

3 min read 7 months ago
Published on Aug 06, 2024 This response is partially generated with the help of AI. It may contain inaccuracies.

Table of Contents

Introduction

This tutorial provides step-by-step instructions on how to program a spare remote key for a 2012-2020 Toyota Camry using the Autel IM508 key programming tool. Proper key programming is essential for ensuring that your vehicle's security system functions correctly.

Step 1: Verify Master Key Status

  • Check for the security light on your dashboard:
    • Insert the existing master key into the ignition.
    • Turn the key to the "On" position.
    • Observe the security light:
      • If it goes off, you have a master key.
      • If it blinks more than once, you do not have a master key. You will need this key to program additional keys without resetting the immobilizer.

Step 2: Access the Immobilizer Menu

  • Turn on the Autel IM508 tool and do the following:
    • Navigate to the immobilizer menu.
    • Select "Toyota" and then choose "Manual Selection."
    • Pick "United States" as your region.
    • Select "Camry" and confirm the model year (2012).
    • Ensure you choose "Blade Key" for the type of key you are programming.

Step 3: Program the Remote Key

  • Prepare to program the remote:
    • Ensure the ignition is on.
    • Open the driver’s door and press the lock and unlock buttons on the remote simultaneously.
    • Press the lock button again.
  • Wait for the confirmation beep indicating the remote has been programmed.

Tip: Do not cut the key until you confirm that the remote has been programmed successfully.

Step 4: Begin Key Learning Procedure

  • Access the immobilizer key learning function:
    • Turn the ignition on.
    • Confirm that you have a master key (the tool will indicate this).
    • If prompted, insert the master key and turn the ignition on, then press "OK."
    • Remove the master key and insert the new key for learning while keeping the ignition off.

Step 5: Complete the Learning Process

  • Wait for the theft light on the dashboard to turn off. This can take 1-2 minutes.
  • Once the theft light goes out, press "OK" on the Autel IM508.
  • The tool will confirm that the learning process has succeeded.

Step 6: Verify Key Functionality

  • After cutting the key, check the following:
    • Test the remote to ensure it locks and unlocks the doors.
    • Insert the key into the ignition to verify that it turns smoothly.
    • Start the vehicle to ensure the key works properly and the theft light goes off.

Conclusion

You have successfully programmed a spare remote key for your Toyota Camry. Remember to always verify that you have the correct master key before proceeding with programming. If you encounter any issues, double-check each step to ensure all procedures were followed correctly. Now you're equipped to manage your key programming needs confidently!