Tutorial Mudah: Cara Membuat Flashdisk Bootable Windows 10 dengan Rufus

Introduction

In this tutorial, we'll guide you through the process of creating a bootable USB flash drive for Windows 10 using the Rufus application. This is an essential skill for installing Windows on your computer or performing system repairs. Make sure you have the necessary tools and follow the steps carefully.

Step 1: Prepare Your Tools

Before you begin, gather the following items:

• A USB flash drive with a minimum capacity of 8GB.
• A Windows 10 ISO file, which can be downloaded from the official Microsoft website.
• The Rufus application, which can be downloaded from the Rufus official site.

Important Note

Ensure that all data on your USB flash drive is backed up, as the process will erase everything on it.

Step 2: Install Rufus

1. Download the Rufus executable file from the official website.
2. Double-click the downloaded file to run Rufus. No installation is required as it runs directly.

Step 3: Configure Rufus

1. Insert your USB flash drive into a USB port on your computer.
2. Open Rufus. Your USB drive should automatically be detected and selected in the "Device" dropdown menu.
3. In the "Boot selection" section, click the "SELECT" button and navigate to the Windows 10 ISO file you downloaded earlier.
4. Ensure the "Partition scheme" is set to "MBR" for BIOS or UEFI compatibility.
5. For "File system," choose "NTFS" or "FAT32" depending on your needs (NTFS is recommended for larger files).

Step 4: Start the Bootable USB Creation

1. Once all settings are configured, click the "START" button.
2. A warning message will appear indicating that all data on the USB drive will be destroyed. Confirm that you have backed up your data and click "OK" to proceed.
3. Wait for Rufus to create the bootable USB drive. This may take several minutes.

Step 5: Completing the Process

1. Once the process is complete, you will see the "READY" status in Rufus.
2. Safely eject your USB flash drive by right-clicking the USB icon in the system tray and selecting "Eject."

Conclusion

You have successfully created a bootable USB flash drive for Windows 10 using Rufus. This drive can now be used to install or repair Windows on any compatible computer. Remember to always back up your important data before performing such operations. If you encounter any issues during the process, double-check your settings or consult the Rufus documentation for additional guidance. Happy computing!