Стены шпаклевать не нужно/Декоративная штукатурка BetonSmall/Экономия 100%

Introduction

This tutorial provides a step-by-step guide on using decorative plaster, BetonSmall, to finish walls without the need for traditional plastering. This method not only simplifies the process but also offers significant cost savings. You will learn how to apply this innovative material effectively to achieve a stylish finish.

Step 1: Gather Your Materials

Before starting, ensure you have all necessary materials and tools ready.

• Materials Needed

  • BetonSmall decorative plaster
  • Primer (if required by the product)
  • Water (for mixing)
  • Cleaning cloths

• Tools Needed

  • Trowel or spatula
  • Mixing bucket
  • Sandpaper (for smoothing)
  • Protective gear (gloves, mask, goggles)

Step 2: Prepare the Surface

Proper surface preparation is crucial for the best results.

• Clean the Walls

  • Remove any dust, dirt, or grease from the walls.
  • Ensure the surface is dry before application.

• Prime the Wall (if necessary)

  • Apply a primer suitable for BetonSmall if the wall surface is porous.

Step 3: Mix the BetonSmall Plaster

Correct mixing ensures optimal consistency and performance.

• Mixing Instructions
  • Pour the recommended amount of BetonSmall into a mixing bucket.
  • Gradually add water according to the manufacturer's instructions.
  • Stir thoroughly until a smooth, lump-free consistency is achieved.

Step 4: Apply the Plaster

Now it's time to apply the decorative plaster.

• Application Technique

  • Use a trowel or spatula to scoop the plaster.
  • Spread it evenly onto the wall in a thin layer.
  • Work in small sections to maintain control.

• Tips for a Smooth Finish

  • Apply pressure evenly while spreading.
  • Leave a slightly textured finish for a more decorative look.

Step 5: Texture and Finish

Adding texture can enhance the visual appeal of the walls.

• Creating Texture

  • Use a clean trowel or a specific texturing tool to create desired patterns.
  • Experiment with different techniques, such as swirling or stippling.

• Drying Time

  • Allow the plaster to dry completely before moving on to any additional steps or painting.

Step 6: Clean Up

After application, it's important to clean your tools and workspace.

• Tool Cleaning

  • Clean your trowel and mixing bucket with water immediately after use to prevent plaster from hardening on them.

• Workspace Cleanup

  • Wipe down any spills or excess plaster from the floor or surrounding areas.

Conclusion

Using BetonSmall decorative plaster can transform your walls without the need for traditional plastering techniques. By following these steps—gathering materials, preparing surfaces, mixing, applying, adding texture, and cleaning up—you can achieve a professional-looking finish while saving on costs. For purchasing BetonSmall, visit www.oboevnet.ua. Consider experimenting with different textures and colors to personalize your space further.