2013 FBO Infiniti G37 Sedan VR30 Transmission Swap - Part #1 - Join Me On Our Next Adventure

Introduction

This tutorial walks you through the process of swapping the VR30 transmission into a 2013 Infiniti G37 Sedan, based on a detailed video series. You'll learn about the necessary components, modifications, and crucial tips to ensure a successful swap.

Step 1: Gather Required Parts and Tools

Before starting the swap, ensure you have all necessary components and tools ready.

Required Parts

• VR30 Transmission
• OEM flexplate (consider upgrading to a stronger option like JOL, Z1 Motorsports, or Fast Intentions)
• Torque Solution Aluminum Transmission Mount
• Rev9 Oil Cooler
• Various hoses and brackets
• New gaskets and seals

Tools Needed

• Socket set
• Wrenches
• Screwdrivers
• Transmission jack
• Engine lift
• Pliers
• Torque wrench

Practical Tip

Research each part's compatibility and performance ratings to avoid issues down the line.

Step 2: Prepare the Vehicle

Proper preparation can save a lot of time during the swap.

Steps to Prepare

1. Disconnect the Battery: Always disconnect the negative terminal to prevent electrical issues.
2. Drain Fluids: Drain the transmission fluid, engine oil, and coolant to avoid spills.
3. Lift the Vehicle: Use a jack to lift the car and secure it with jack stands for safety.
4. Remove Underbody Covers: Take off any plastic covers or shields obstructing access to the transmission.

Common Pitfalls

• Forgetting to drain fluids can lead to messy work conditions.
• Failing to secure the vehicle properly may cause safety hazards.

Step 3: Remove the Old Transmission

This step involves detaching the existing transmission from the engine.

Steps to Remove the Transmission

1. Disconnect the Transmission Lines: Carefully detach the fluid lines connected to the old transmission.
2. Unbolt the Transmission: Remove all bolts securing the transmission to the engine and the crossmember.
3. Support the Transmission: Use a transmission jack to support the weight of the transmission.
4. Lower the Transmission: Carefully lower the old transmission out of the vehicle.

Practical Advice

Keep track of all bolts and components removed; labeling them can help during reassembly.

Step 4: Install the VR30 Transmission

With the old transmission out, it's time to install the new one.

Steps for Installation

1. Position the VR30 Transmission: Align the new transmission with the engine using a transmission jack.
2. Bolt the Transmission in Place: Secure the transmission to the engine and the crossmember using the original bolts.
3. Reconnect Transmission Lines: Attach the fluid lines to the VR30 transmission.
4. Install the Flexplate: Ensure the flexplate is securely attached to prevent future failures.

Important Note

Consider upgrading the flexplate while the transmission is accessible, as advised in the video.

Step 5: Reconnect Components

After installing the transmission, reconnect all components.

Steps to Reconnect

1. Reconnect Electrical Connections: Ensure all sensors and electrical connectors are properly attached.
2. Refill Fluids: Fill the transmission with the recommended fluid and refill the engine oil and coolant.
3. Reinstall Underbody Covers: Put back any covers or shields removed during the preparation phase.

Practical Tip

Double-check all connections and fluid levels before starting the vehicle.

Conclusion

This guide provides a structured approach to swapping the VR30 transmission into your Infiniti G37 Sedan. Key takeaways include gathering all necessary parts, careful removal and installation of the transmission, and considering upgrades like a stronger flexplate. For further assistance, refer to additional resources from channels like Infiniti Brothers and other tutorials linked above. Happy wrenching!