Skoda Octavia A5. Замена задних тормозных дисков и колодок.

Introduction

This tutorial provides a step-by-step guide for replacing the rear brake discs and pads on a Skoda Octavia A5 (2011, 1.6 BSE engine). Maintaining your vehicle's braking system is crucial for safety, and this process can be done effectively at home with the right tools and instructions.

Step 1: Gather Necessary Tools and Materials

Before starting, make sure you have the following tools and materials ready:

• New brake discs
• New brake pads
• Jack and jack stands
• Lug wrench
• Brake cleaner
• Torque wrench
• Screwdriver set
• Protective gloves and eyewear

Step 2: Prepare the Vehicle

1. Park the Car Safely: Ensure the vehicle is on a flat surface and engage the parking brake.
2. Loosen Lug Nuts: Use the lug wrench to slightly loosen the lug nuts on the rear wheels while the car is still on the ground.

Step 3: Lift the Vehicle

1. Jack Up the Car: Use the jack to lift the rear of the vehicle.
2. Secure with Jack Stands: Place jack stands under the vehicle for safety.

Step 4: Remove the Rear Wheels

1. Finish Loosening the Lug Nuts: Remove the loosened lug nuts completely.
2. Take Off the Wheels: Carefully remove the rear wheels and set them aside.

Step 5: Remove the Old Brake Calipers

1. Locate the Brake Caliper: Identify the brake caliper that holds the brake pads.
2. Unbolt the Caliper: Use the appropriate screwdriver or wrench to remove the bolts securing the caliper.
3. Support the Caliper: Hang the caliper using a bungee cord or wire to avoid stressing the brake line.

Step 6: Remove Old Brake Pads and Discs

1. Take Out the Brake Pads: Remove the old brake pads from the caliper bracket.
2. Remove the Brake Disc: Unscrew any retaining screws and pull off the old brake disc.

Step 7: Clean and Prepare New Parts

1. Clean New Brake Discs: If the new brake discs have a protective coating (often grease), clean them thoroughly with brake cleaner.
2. Inspect Other Components: Check the caliper and bracket for wear or damage.

Step 8: Install New Brake Discs

1. Position the New Disc: Place the new brake disc onto the hub and secure it with retaining screws if applicable.
2. Ensure Proper Alignment: Make sure the disc is fitted correctly and free of any obstructions.

Step 9: Install New Brake Pads

1. Insert New Brake Pads: Fit the new brake pads into the caliper bracket.
2. Reattach Brake Caliper: Position the caliper over the new pads and bolt it securely.

Step 10: Reinstall the Wheels

1. Put the Wheels Back On: Align the wheels with the hub and hand-tighten the lug nuts.
2. Lower the Vehicle: Carefully remove the jack stands and lower the vehicle back to the ground.

Step 11: Finalize Installation

1. Tighten Lug Nuts: Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications.
2. Test the Brakes: Before driving, pump the brakes a few times to ensure proper pad seating and functionality.

Conclusion

You have successfully replaced the rear brake discs and pads on your Skoda Octavia A5. Regular maintenance of your braking system is essential for vehicle safety and performance. If you're interested in further maintenance projects, consider checking out tutorials for other brake components or front brake replacements. Always consult your vehicle's manual for specific details and specifications.