How to make a table.Walnut and epoxy resin table WOODWORKING

Introduction

In this tutorial, you will learn how to create a beautiful dining table using European walnut and epoxy resin. This guide covers everything from selecting your materials to finishing the table, ensuring you understand each step of the woodworking process.

Step 1: Gather Your Materials

Before beginning, ensure you have the following materials and tools:

• Wood: European walnut with a humidity level of 8%
• Resin: Approximately 28 kilograms of epoxy resin
• Legs: Ash wood with a 100x100mm section
• Sandpaper: Grits P-60 to P-150
• Wood oil: Amerikan wood oil for finishing
• Clamps: For securing pieces during assembly
• Additional tools: Scriber, positioning square, guide rail square

Step 2: Prepare the Tabletop

1. Cut the Wood: Start by cutting your walnut to the desired dimensions (2000x900mm) and thickness (53mm).
2. Fill Void Spaces: Use wood scraps to fill any voids in the walnut. This helps save on resin usage.
3. Layering the Epoxy: Plan to pour the epoxy in three layers to achieve the desired thickness and finish.

Step 3: Mix and Pour Epoxy

1. Mix the Epoxy: Follow the instructions provided with your epoxy resin to mix it correctly.
2. Pour the First Layer: Pour a thin layer of epoxy into your mold and let it cure. This creates a base for the walnut.
3. Add the Walnut: Once the first layer is cured, position the walnut pieces and pour the second layer of epoxy.
4. Cure the Layers: Allow each layer to cure as per the manufacturer's instructions before pouring the next.

Step 4: Sand the Tabletop

1. Initial Sanding: Once the epoxy has fully cured, start sanding the tabletop with P-60 grit sandpaper to remove any rough edges or imperfections.
2. Progress to Finer Grits: Gradually move to finer grits (P-80, P-120, and finally P-150) for a smooth finish.

Step 5: Apply Finish

1. Choose Your Finish: Use Amerikan wood oil for a protective and aesthetic finish.
2. Apply Coats: Apply three coats of wood oil, allowing adequate drying time between each coat.

Step 6: Assemble the Table

1. Create the Legs: Cut the ash wood into the desired leg dimensions.
2. Attach the Legs: Use appropriate hardware to secure the legs to the tabletop, ensuring stability.

Conclusion

Congratulations on crafting your own walnut and epoxy resin dining table! Remember to take your time during each step, especially while sanding and finishing, to achieve the best results. Consider sharing your finished project on social media or with your woodworking community for feedback and inspiration. If you have questions or need further guidance, refer to the resources shared in the video description. Happy woodworking!