POCO X3 Pro Replacement Display

Introduction

This tutorial guides you through the process of replacing the display on a POCO X3 Pro smartphone. Whether your screen is cracked, unresponsive, or displaying issues, this step-by-step guide will help you successfully install a new display, restoring your device to full functionality.

Step 1: Gather Necessary Tools and Parts

Before you start, ensure you have all the required tools and replacement parts ready.

• Tools Needed:

  • Phillips screwdriver
  • Plastic prying tools
  • Suction cup
  • Tweezers
  • Heat gun or hair dryer

• Replacement Parts:

  • New display assembly for POCO X3 Pro

Step 2: Power Off the Device

To avoid any electrical damage or short circuits during the replacement process, ensure the phone is completely powered off.

• Hold the power button.
• Select the option to turn off the device.
• Wait until the screen is completely black.

Step 3: Remove the Back Cover

The next step is to remove the back cover of the phone.

• Use a heat gun or hair dryer to warm the edges of the back cover. This softens the adhesive.
• Place a suction cup on the back cover and gently pull to create a gap.
• Insert a plastic prying tool into the gap and carefully slide it around the edges to detach the cover.
• Be cautious not to damage the internal components while doing this.

Step 4: Disconnect the Battery

Once the back cover is removed, locate and disconnect the battery to ensure safety.

• Identify the battery connector on the motherboard.
• Use a plastic prying tool to gently lift the connector from its socket.

Step 5: Remove the Old Display

Now, it’s time to detach the old display from the device.

• Locate the screws securing the display assembly. Use the Phillips screwdriver to remove them.
• Carefully insert a plastic prying tool around the edges of the display to loosen it.
• Gently lift the display from the device, ensuring not to pull on any attached cables.

Step 6: Install the New Display

With the old display removed, you can now install the new one.

• Position the new display assembly into place.
• Press gently to secure it, ensuring all clips are aligned.
• Reattach the screws you removed earlier to secure the display.

Step 7: Reconnect the Battery

After the new display is secured, you need to reconnect the battery.

• Align the battery connector with its socket on the motherboard.
• Press down gently until it clicks into place.

Step 8: Reassemble the Back Cover

Finish the process by reattaching the back cover.

• Align the back cover with the device body.
• Press firmly around the edges to ensure the adhesive sticks.
• If necessary, use a heat gun to apply gentle heat to reactivate the adhesive.

Conclusion

You've successfully replaced the display on your POCO X3 Pro! Power on the device to ensure everything is functioning correctly. If you encounter any issues, double-check all connections and ensure the display is securely attached. For future maintenance, consider using a protective case to prevent damage. Enjoy your revitalized phone!