Riparazione asciugacapelli philips SalonDry Control HP8183

Introduction

This tutorial provides a step-by-step guide on how to repair a Philips HP 8183/00 SalonDry Control hairdryer with a broken power cord. If you're facing a similar issue, these instructions will help you troubleshoot and fix the problem effectively, saving you the cost of a new hairdryer.

Step 1: Gather Necessary Tools and Materials

Before starting the repair, ensure you have the following items:

• Replacement power cord (you can find one here)
• Screwdriver set (preferably a Phillips head)
• Wire stripper or scissors
• Soldering iron (optional, for more secure connections)
• Electrical tape or heat shrink tubing

Step 2: Disassemble the Hairdryer

To access the internal components:

1. Unplug the Hairdryer: Always ensure the device is unplugged before beginning any repairs.
2. Locate Screws: Use the screwdriver to find and remove screws on the handle and body of the hairdryer.
3. Carefully Open the Body: Gently pull apart the two halves of the hairdryer to avoid damaging any clips or internal components.

Step 3: Remove the Broken Power Cord

Now that you have access to the internal parts:

1. Identify the Power Cord Connection: Locate where the power cord connects to the circuit board.
2. Disconnect the Broken Cord: Carefully unscrew or unclip the power cord from the internal connections.
3. Remove the Cord: Take out the damaged power cord completely from the hairdryer.

Step 4: Install the New Power Cord

Once the old cord is removed, it’s time to install the new one:

1. Prepare the New Cord: Strip the ends of the new power cord to expose the wires.
2. Connect the Wires:
   • Match the wires from the new cord to the corresponding connections on the circuit board (usually color-coded).
   • If needed, use a soldering iron to secure the connections.
3. Secure Connections: Use electrical tape or heat shrink tubing to cover any exposed wires and ensure safety.

Step 5: Reassemble the Hairdryer

After connecting the new power cord:

1. Align the Two Halves: Make sure all internal components are positioned correctly and not pinched.
2. Replace Screws: Secure the hairdryer by reinserting and tightening the screws you removed earlier.
3. Check for Stability: Ensure the body of the hairdryer is firmly closed and there are no loose parts.

Step 6: Test the Hairdryer

Before finalizing your repair:

1. Plug in the Hairdryer: Make sure you are in a safe area away from water.
2. Turn It On: Check if the hairdryer powers on and operates normally.
3. Monitor for Issues: Listen for any unusual sounds or smells; if something seems off, double-check your connections.

Conclusion

Congratulations on successfully repairing your Philips HP 8183 hairdryer! By following these steps, you can extend the life of your appliance and save money. If you encounter any additional issues, consider consulting a professional or looking for troubleshooting guides specific to your model. Happy drying!