Awesafe 9" Car Stereo 2009-2012 Ford F-150 Install

Introduction

This tutorial will guide you through the process of removing the old factory stereo from a 2009-2012 Ford F-150 and installing the Awesafe 9" Android car stereo. This upgrade enhances your vehicle's functionality with features such as Bluetooth, wireless Apple CarPlay and Android Auto, GPS navigation, and more.

Step 1: Gather Necessary Tools and Materials

Before starting the installation, ensure you have all the tools and materials needed for a smooth process.

• Tools Required:

  • Flathead screwdriver
  • Phillips screwdriver
  • Panel removal tool
  • Wire connectors
  • Electrical tape

• Materials:

  • Awesafe 9" Android Car Stereo
  • 12v Type C USB Outlet (optional)

Step 2: Disconnect the Battery

Safety is paramount when working with electrical components.

• Open the hood and locate the battery.
• Use a wrench to disconnect the negative terminal of the battery to prevent any electrical shorts during installation.

Step 3: Remove the Factory Stereo

Follow these steps to safely remove the old stereo.

1. Remove the Trim Panel:

   • Use a panel removal tool to gently pry away the trim around the factory stereo.
   • Be careful not to damage the surrounding panels.

2. Unscrew the Stereo:

   • Locate the screws securing the factory stereo.
   • Use a Phillips screwdriver to remove these screws.

3. Disconnect Wiring Harness:

   • Pull the stereo out and carefully disconnect the wiring harness and antenna cable from the back of the unit.

Step 4: Prepare the New Awesafe Stereo

Before installation, ensure the new stereo is ready.

• Connect the wiring harness to the Awesafe stereo using the appropriate connectors.
• If installing the 12v Type C USB outlet, follow the manufacturer’s instructions for wiring it to the vehicle’s power supply.

Step 5: Install the Awesafe Stereo

Now it's time to install the new stereo.

1. Connect Wiring:

   • Connect the wiring harness and antenna cable to the back of the Awesafe stereo.

2. Secure the Stereo:

   • Slide the stereo into the dashboard.
   • Use the screws you removed earlier to secure the stereo in place.

3. Reattach the Trim Panel:

   • Carefully snap the trim panel back into place around the new stereo.

Step 6: Reconnect the Battery and Test

Once everything is installed, it’s time to test the new system.

• Reconnect the negative terminal of the battery.
• Turn on the ignition and test the Awesafe stereo functions, including Bluetooth, navigation, and other features.

Conclusion

You have successfully upgraded your 2009-2012 Ford F-150 with the Awesafe 9" Android car stereo. Enjoy the modern features this new system brings to your vehicle. For further enhancements, consider adding the 12v Type C USB outlet for additional charging capabilities. Happy driving!