Замена подшипников в стиральной машине Electrolux, Zanussi, AEG

Introduction

This tutorial provides a step-by-step guide on how to replace bearings in top-loading washing machines from Electrolux, Zanussi, AEG, and Privilege. Replacing bearings can resolve issues like excessive noise during operation and is essential for maintaining the machine's efficiency.

Step 1: Gather Necessary Tools and Parts

Before you start, make sure you have all the required tools and replacement parts.

Tools Needed

• Screwdriver set (flathead and Phillips)
• Pliers
• Wrench set
• Bearing puller (optional)
• Lubricant

Parts Needed

• New bearings (specific to your model)
• Support brackets (part links provided)
• Flanges (part links provided)
• Lubricant (part link provided)

Step 2: Disconnect the Washing Machine

Safety is a priority when working with appliances.

• Unplug the washing machine from the power source.
• Disconnect the water supply hoses to prevent leaks.
• Move the machine to a well-ventilated workspace if needed.

Step 3: Access the Bearings

To replace the bearings, you need to open the washing machine's casing.

• Remove the screws securing the top panel.
• Lift the top panel off carefully.
• Depending on your model, you may need to remove the drum to access the bearings.

Step 4: Remove the Old Bearings

Once you have access to the bearings, follow these steps:

• Identify the location of the bearings.
• Use a bearing puller or pliers to carefully remove the old bearings.
• Inspect the bearing housing for any damage.

Step 5: Install the New Bearings

Now, you will install the new bearings.

• Clean the bearing housing thoroughly.
• Apply a thin layer of lubricant to the new bearings.
• Carefully insert the new bearings into the housing, ensuring they are seated properly.

Step 6: Reassemble the Washing Machine

After installing the new bearings, it’s time to put everything back together.

• Reassemble the drum and secure it in place.
• Replace the top panel and secure it with screws.
• Reconnect all hoses and power supply.

Step 7: Test the Washing Machine

Before you conclude the process, it’s important to test the machine.

• Plug the machine back in and turn on the water supply.
• Run a short cycle to check for any unusual noises or leaks.
• Ensure the machine operates smoothly.

Conclusion

Replacing bearings in your washing machine can extend its lifespan and improve its performance. By following these steps, you can tackle this repair confidently. Don't forget to keep your tools and parts organized during the process. If you encounter any issues, consult a professional technician. Happy repairing!