3D Resin Printer Anycubic Photon Mono 2 - Set up and how to level the build plate

Introduction

This tutorial will guide you through the setup process of the Anycubic Photon Mono 2 3D resin printer, focusing on the installation of the protective film on the screen and leveling the build plate. These steps are crucial for ensuring optimal printing results and preventing common issues during the printing process.

Step 1: Preparing the Printer

• Unbox the Printer: Carefully remove the printer from its packaging, ensuring you keep all components intact.
• Locate the Components: Identify the build plate, resin tank, and other accessories included in the box.
• Read the Manual: Familiarize yourself with the user manual for specific instructions related to your model.

Step 2: Installing the Protective Film

• Gather Materials: You will need the protective film, scissors, and a clean, dust-free environment.
• Cut the Film to Size: Measure the screen on your printer and cut the protective film accordingly.
• Clean the Screen: Wipe the screen surface with a microfiber cloth to remove any dust or fingerprints.

Apply the Film

• Align the film carefully with the edges of the screen.
• Slowly peel off the backing and press the film onto the screen, ensuring no air bubbles are trapped underneath.
• Use a credit card or similar object to smooth out any bubbles.

Step 3: Leveling the Build Plate

• Initial Setup: Ensure the printer is powered on and the build plate is attached.
• Access the Leveling Menu: Navigate to the settings on the printer's display to find the leveling options.

Position the Build Plate

• Lower the build plate until it makes contact with the screen.
• Use a piece of paper (like printer paper) to gauge the space between the build plate and the screen.

Adjust the Screws

• Tighten or loosen the screws on the build plate to achieve the desired resistance when moving the paper.
• The paper should have slight resistance when pulled out, indicating proper leveling.
• Test the Leveling: Perform a quick test print to verify that the build plate is leveled correctly.

Step 4: Final Checks

• Inspect the Setup: Double-check that all components are securely in place.
• Check for Firmware Updates: Ensure your printer's firmware is up-to-date for optimal performance.

Prepare for Printing

• Fill the resin tank with resin and ensure there are no leaks.
• Select or upload your desired 3D model for printing.

Conclusion

Setting up your Anycubic Photon Mono 2 printer involves careful installation of the protective film and precise leveling of the build plate. Following these steps will help you avoid common pitfalls and ensure successful prints. After completing the setup, you're ready to start printing your 3D models. For further exploration, consider experimenting with different resin types and print settings to enhance your printing experience.