TP-Link TL WR840N Seting Mode WISP - Cara Setting TL Wr840N Menggunakan Mode WISP #tplink
3 min read
6 days ago
Published on Oct 01, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
This tutorial provides a step-by-step guide on how to configure the TP-Link TL WR840N router using WISP mode. WISP (Wireless Internet Service Provider) mode allows your router to connect to another wireless network and share that connection with other devices. This setup is particularly useful for extending your internet reach and managing multiple users effectively.
Step 1: Access the Router's Admin Interface
- Connect your computer or smartphone to the TP-Link TL WR840N router using a wired or wireless connection.
- Open a web browser and enter the router's IP address, typically
192.168.0.1
ortplinkwifi.net
. - Log in using the default credentials. Usually, the username and password are both set to
admin
.
Step 2: Navigate to Quick Setup
- Once logged in, look for the "Quick Setup" option in the main menu.
- Click on "Quick Setup" to start the configuration process.
Step 3: Select WISP Mode
- In the Quick Setup menu, choose the "WISP" option.
- This mode will allow your router to connect to an existing wireless network.
Step 4: Configure Internet Connection Settings
- You will be prompted to select your Internet Connection Type:
- Dynamic: Choose this option if you want the router to obtain an IP address automatically.
- Static: Select this if you want to manually enter the IP address details.
- If you select Static, enter the following details:
- IP Address
- Subnet Mask
- Gateway
- DNS Server
Step 5: Set Up Wireless Settings
- Configure your wireless settings:
- Network Name (SSID): Set a unique name for your Wi-Fi network.
- Security Mode: Choose a security protocol (WPA2 recommended).
- Password: Create a strong password for your network.
Step 6: Manage User Access
- Go to the user management settings to control how many devices can connect to your network.
- Adjust the settings according to your preferences, allowing for better network management.
Step 7: Extend Network with Additional Routers
- If desired, you can connect additional routers to extend your network further.
- This is particularly beneficial since WISP mode allows for internet sharing that typical range extenders might not support.
Conclusion
By following these steps, you can successfully set up your TP-Link TL WR840N router in WISP mode, allowing for efficient internet sharing and user management. Remember to save your settings before exiting the interface. If you need further assistance or wish to explore other configurations, consider checking additional tutorials related to TP-Link routers.