Learn How to Solve a Rubik's Cube in 10 Minutes (Beginner Tutorial)

Introduction

This tutorial will guide you through the process of solving a Rubik's Cube using a beginner-friendly method. You will learn how to create the white cross, complete the first two layers, form the yellow cross on top, and finally position the corners correctly. With practice, you'll be able to solve the cube in about 10 minutes.

Chapter 1: White Cross

1. Position the Cube: Hold the white centerpiece on top.
2. Find White Edge Pieces: Look for white edge pieces on the bottom layer, avoiding corner pieces.
3. Align with Center Colors:
   • Move the white edge piece along the bottom until it's under the correct colored center.
   • For example, if you find a white and green edge piece, it should be under the green center.
4. Insert Edge Pieces:
   • Turn the corresponding center face 180 degrees to move the white edge piece to the top.
5. Handle Tricky Situations:
   • If edge pieces are not in their correct positions, move them to the side and perform a top counter-clockwise turn before reinserting.
   • If an edge piece is in the middle layer, move it down to the bottom layer first to solve the cross.

Chapter 2: 1st Layer

1. Check Alignment: Ensure the white cross is complete and side colors match the centers.
2. Learn the Four Move Sequence:
   • Hold the cube with your left thumb on the front and your right thumb on the bottom.
   • Perform the sequence:
     • Right side up
     • Top clockwise
     • Right side down
     • Top counter-clockwise
3. Inserting White Corners:
   • Look for corners with white and note the other colors.
   • Align the corner above its destination (e.g., white, green, red corner goes between the white, green, and red centers).
   • If the corner is on the right side, perform the four move sequence.
   • If on the left, hold it on the left side and use the left hand sequence.

Chapter 3: 2nd Layer

1. Identify Edge Pieces: Find an edge piece on the top that does not have yellow.
2. Position the Edge:
   • Match the front color of the edge piece with the center color.
   • Determine whether it needs to go left or right.
3. Insert Edge Pieces:
   • For right insertion:
     • Move the edge piece away to the left first.
     • Use the right hand four move sequence to remove the corner.
     • Reinsert using the left hand sequence.
   • For left insertion:
     • Move the edge piece to the right first.
     • Use left hand to remove the corner and right hand to reintegrate.

Chapter 4: Top Cross

1. Create the Yellow Cross:
   • If you see no edges complete, perform the four move sequence after turning the front face clockwise.
   • If you see an L shape, place it in the top left before performing the moves.
   • For a horizontal line, align it horizontally before executing the moves.
2. Align Side Colors:
   • Check if all edges match their respective center colors.
   • If two colors are aligned, hold them at the back and right to continue.
   • If colors are across from each other, use the algorithm to align them.

Chapter 5: Move the Corners

1. Position the Corners:
   • Check each corner to see if it's in the correct position.
   • If only one corner is correct, hold it on the front right.
   • If none are correct, perform the corner algorithm from any position.
2. Repeat Until All Corners Are Positioned:
   • Continue executing the algorithm until all corners are correctly positioned, regardless of their orientation.

Chapter 6: Final Step

1. Turn the Cube Upside Down: Position the corners in the bottom layer.
2. Solve Each Corner:
   • Start with the bottom right corner and perform the four move sequence until solved.
   • Move the next corner into place by turning the bottom layer, not the whole cube.
3. Repeat for Remaining Corners: Continue solving each corner one by one until the entire cube is complete.

Conclusion

You have now learned how to solve the Rubik's Cube using a structured approach. Practice is essential, so keep trying these steps until you can complete the cube smoothly. For further improvement, consider exploring advanced techniques or tutorials available on the channel. Happy cubing!