How To Install Delta Shower Faucet - In 10 Minutes! - Beginners Guide

Introduction

This tutorial will guide you through the process of installing a Delta Multichoice shower faucet in just 10 minutes. This beginner-friendly installation uses PEX pipe and covers everything from preparation to completion, ensuring you have the tools and knowledge needed for a successful installation.

Step 1: Gather Your Tools and Materials

Before you start, make sure you have the following tools and materials on hand:

Tools

• Hammer
• Tape Measure
• Speed Square
• Chalk Box
• Utility Knife

Materials

• Delta Faucet R10000-UNBXHF MultiChoice Universal Shower Valve
• PEX piping

Tips

• Check your local plumbing codes to ensure compliance.
• Lay out all materials for easy access during installation.

Step 2: Prepare the Installation Area

• Turn off the water supply to your shower to prevent any leaks during installation.
• Clear the area around the existing shower control to provide ample working space.

Practical Advice

• If you're replacing an old faucet, carefully remove it to avoid damaging existing plumbing.

Step 3: Install the Delta Shower Valve

• Position the Delta shower valve in the wall cavity. Ensure it is level and properly aligned.
• Use the mounting screws provided with the valve to secure it to the wall.

Common Pitfalls

• Double-check that the valve is oriented correctly to avoid flow issues.
• Make sure the valve is securely fastened to prevent movement.

Step 4: Connect the PEX Pipes

• Cut the PEX pipes to the required lengths using a utility knife.
• Use crimp rings to secure the PEX pipes to the valve fittings.

# PEX Connection Example
For connection, ensure the PEX pipe is fully inserted into the fitting before crimping the ring:
1. Slide the crimp ring onto the pipe.
2. Position the pipe on the fitting.
3. Use a crimping tool to secure the ring.

Practical Advice

• Ensure all connections are tight to prevent leaks.
• Use a PEX manifold if necessary for better water distribution.

Step 5: Finalize the Installation

• After connecting the pipes, install the trim kit and handle according to the manufacturer's instructions.
• Turn on the water supply and check for leaks.

Testing

• Run the shower to ensure proper functionality and temperature control.

Conclusion

You have successfully installed your Delta shower faucet! Remember to review your work for any leaks and ensure everything is functioning properly. If you encounter any issues, consult with a plumbing professional for assistance. Enjoy your new shower setup!