iPad Pro 10.5 Battery Replacement 2017

Introduction

This tutorial provides a step-by-step guide for replacing the battery of an iPad Pro 10.5 (2017 model). If your device is experiencing battery issues, this guide will help you safely and effectively replace the battery yourself, ensuring your iPad runs optimally again.

Step 1: Prepare Your Workspace

• Gather all necessary tools:
  • Heat mat
  • Portable heat gun or heat station
  • Premium screwdrivers
  • Silicone repair mat
  • Adhesive (glue)
  • Clamps (if needed)
• Choose a clean, well-lit workspace to avoid losing small parts.

Step 2: Open the iPad Pro

• Use a heat gun to carefully warm the edges of the iPad to soften the adhesive.
• Once warm, use a plastic opening tool to gently pry open the device, starting from one corner and working your way around the edges.

Step 3: Remove the Front Screen

• Carefully detach the front screen from the body of the iPad.
• Be cautious of any cables that may still be connected.

Step 4: Loosen the Battery Screw

• Locate the battery connector screw inside the device.
• Use a screwdriver to loosen and remove this screw.

Step 5: Remove the Board Shield

• Carefully detach the board shield that protects the internal components.
• Pay attention to any screws and connectors attached to the shield.

Step 6: Remove the Logic Board

• Gently lift and remove the logic board from its position.
• Ensure all connectors are detached before fully removing it.

Step 7: Remove the Not Working Battery

• Locate the old battery and carefully peel it away from the adhesive holding it in place.
• Be cautious of any residual adhesive; you may use a heat gun to assist in loosening it.

Step 8: Place the New iPad Pro 10.5 Battery

• Take the new battery and align it carefully in the designated space.
• Press it down firmly to ensure it adheres to the adhesive.

Step 9: Reinstall the Logic Board

• Carefully place the logic board back into its original position.
• Reconnect any connectors that were detached during removal.

Step 10: Replace the Board Shield

• Reattach the board shield, securing it with the screws you previously removed.

Step 11: Secure the Battery Connector Screw and Charging Port Screws

• Reinstall the battery connector screw and any screws associated with the charging port.
• Ensure everything is tightened properly to avoid any loose connections.

Step 12: Install the Screen

• Carefully position the front screen back onto the iPad.
• Ensure it aligns properly with the body and all edges are sealed.

Step 13: Close and Bind the Screen

• Press down firmly around the edges of the screen to seal it.
• If necessary, apply additional adhesive to ensure a secure fit.

Conclusion

Congratulations! You have successfully replaced the battery in your iPad Pro 10.5 (2017 model). To ensure your device operates efficiently, monitor its performance after the replacement. If you encounter any further issues, consider seeking professional assistance or exploring additional repair guides.