Como reparar lavadora whirlpool

Introduction

In this tutorial, we will guide you through the process of disassembling a Whirlpool washing machine to replace its transmission. Understanding this process can save you time and money on repairs. Follow these steps carefully to ensure a successful repair.

Step 1: Gather Necessary Tools

Before starting the disassembly, make sure you have the following tools on hand:

• Screwdriver (Phillips and flat-head)
• Pliers
• Socket set
• A towel or cloth (to catch any water spills)
• Safety gloves

Step 2: Disconnect the Washing Machine

Safety is paramount. Follow these steps to disconnect your washing machine:

1. Unplug the machine from the electrical outlet to avoid any electrical hazards.
2. Turn off the water supply valves located behind the machine.
3. Disconnect the water hoses from the back of the washing machine.

Step 3: Remove the Control Panel

To access the internals, you'll need to remove the control panel:

1. Locate the screws securing the control panel at the back.
2. Using the screwdriver, carefully remove these screws.
3. Gently lift the control panel off and disconnect any wiring harnesses attached to it.

Step 4: Take Off the Top and Front Panels

Next, remove the top and front panels:

1. Unscrew the screws located at the back of the top panel.
2. Slide the top panel backward and lift it off.
3. For the front panel, locate and remove its screws.
4. Carefully detach the front panel from the machine.

Step 5: Remove the Drum and Transmission

Now, it's time to take out the drum and the transmission:

1. Disconnect the drive belt from the motor pulley.
2. Use a socket set to remove the bolts securing the transmission.
3. Gently pull the drum out of the machine.
4. With the drum removed, you can access the transmission for replacement.

Step 6: Install the New Transmission

Once the old transmission is out, follow these steps to install the new one:

1. Align the new transmission in place.
2. Secure it with the bolts you previously removed.
3. Reattach the drive belt to the motor pulley.

Step 7: Reassemble the Washing Machine

After replacing the transmission, it's time to put everything back together:

1. Reattach the front panel and secure it with screws.
2. Place the top panel back and slide it into position, securing it with screws.
3. Reconnect the wiring harness to the control panel and place it back on the machine.

Step 8: Reconnect Water and Power Supply

With the washing machine reassembled, you can reconnect everything:

1. Reattach the water hoses and ensure there are no leaks.
2. Turn on the water supply valves.
3. Plug the machine back into the electrical outlet.

Conclusion

You have successfully disassembled and repaired your Whirlpool washing machine by replacing the transmission. Always double-check for leaks and ensure all components are securely in place before running the machine. If you encounter any issues during the process, consult the user manual or seek professional help. Happy washing!