Membuat Jackstand Atau Dongkrak Dari Besi Bekas ! ! !

Introduction

In this tutorial, we will guide you through the process of creating a jack stand using scrap metal. This project is not only a great way to recycle materials but also provides a practical tool for your workshop or garage. We will use specific types of metal, ensuring the jack stand is durable and reliable.

Step 1: Gather Your Materials

Before starting, collect the necessary materials:

• Metal Types:

  • L-shaped metal (Besi Siku) – 3x3 cm, 3 mm thick
  • Hollow metal (Besi Holo) – 4x4 cm, 3 mm thick

• Tools Needed:

  • Welding machine
  • Angle grinder
  • Measuring tape
  • Safety gear (gloves, goggles, mask)

Step 2: Measure and Cut the Metal

Accurate measurements are crucial for building a sturdy jack stand.

1. Measure:

   • Decide the height and width of your jack stand. A common height is around 30-40 cm.
   • Mark the metal pieces accordingly.

2. Cut:

   • Use an angle grinder to cut the metal pieces based on your measurements.
   • Make sure to cut straight and clean lines for a better fit.

Step 3: Assemble the Frame

Now, assemble the cut pieces into a frame.

1. Create the Base:

   • Take four pieces of the L-shaped metal to form a square or rectangular base.
   • Use a welding machine to join the corners securely.

2. Add Vertical Supports:

   • Weld two vertical pieces of the hollow metal to each corner of the base.
   • Ensure they are perpendicular to the base for stability.

Step 4: Attach the Cross Brace

To enhance stability, a cross brace is essential.

1. Measure and Cut the Brace:

   • Cut two additional pieces of L-shaped metal to fit diagonally across the frame.

2. Weld the Brace:

   • Position the cross brace inside the frame and weld it securely at the intersections with the vertical supports.

Step 5: Finalize the Jack Stand

Complete your jack stand with finishing touches.

1. Check Stability:

   • Ensure all welds are solid and the structure is stable.
   • Make adjustments if necessary.

2. Paint (Optional):

   • For added protection against rust, consider painting your jack stand with a rust-resistant paint.

Conclusion

You have successfully created a jack stand from scrap metal! This project not only saves money but also helps in recycling materials. Remember to check the stability and strength of your jack stand before use. If you are looking for more creative projects, consider exploring other DIY tools or accessories for your workshop. Happy crafting!