Migrate from old NVR to new VORTEX supported AI NVR

Introduction

This tutorial will guide you through the process of migrating from an old Network Video Recorder (NVR) to a new VORTEX-supported AI NVR. The transition to a modern NVR can enhance your surveillance capabilities, offering better performance and advanced features. Follow these steps to ensure a smooth migration.

Step 1: Prepare for Migration

Before starting the migration, gather all necessary information and tools.

• Backup Existing Data

  • Access your old NVR and back up all recordings and settings.
  • Use an external hard drive or network storage for the backups.

• Check Compatibility

  • Confirm that your cameras are compatible with the new VORTEX NVR.
  • Review the specifications and supported models on the VIVOTEK website.

• Gather Required Equipment

  • Ensure you have the new VORTEX AI NVR and all required accessories, such as cables and power supplies.

Step 2: Install the New VORTEX AI NVR

Set up the new NVR in your desired location.

• Physical Installation

  • Place the NVR in a well-ventilated area to avoid overheating.
  • Connect the NVR to a power source and your network.

• Initial Configuration

  • Power on the NVR and connect it to your monitor or TV for setup.
  • Follow the on-screen instructions to configure basic settings such as language, date, and time.

Step 3: Transfer Data from Old NVR

Now it’s time to transfer the backed-up data to your new NVR.

• Connect External Storage

  • If you used an external hard drive for the backup, connect it to the new NVR.

• Import Data

  • Navigate to the import settings on the VORTEX NVR.
  • Select the option to import data and follow the prompts to transfer your recordings and settings.

Step 4: Configure Camera Settings

Once the data is transferred, configure your camera settings.

• Add Cameras

  • Access the camera management section of the VORTEX NVR.
  • Use the IP addresses of your cameras to add them to the NVR.

• Adjust Camera Settings

  • Set up recording schedules, motion detection, and alerts based on your preferences.

Step 5: Test the System

After configuration, perform a thorough test of the system.

• Check Live Feed

  • Verify that all cameras are displaying live feeds correctly.

• Review Recordings

  • Check the playback of recorded footage to ensure data has been migrated successfully.

• Test Notifications

  • If you set up alerts, conduct a test to confirm they are functioning as expected.

Conclusion

Migrating to a VORTEX-supported AI NVR can significantly improve your surveillance system. By following these steps—preparing for migration, installing the new NVR, transferring data, configuring cameras, and testing the system—you can ensure a seamless transition. If you encounter any issues, consult the VIVOTEK support documentation or reach out to customer support for assistance.