КАК РАЗАБРАТЬ DUALSHOCK 4? ЧИСТКА ГЕЙМПАДА

Introduction

This tutorial provides a step-by-step guide on how to disassemble and clean a DualShock 4 controller. Regular cleaning can enhance the controller's performance and longevity. Follow these steps for a thorough and effective process.

Step 1: Gather Necessary Tools

Before starting the disassembly, collect the following tools:

• Phillips screwdriver (small size)
• Flathead screwdriver
• Plastic prying tool or guitar pick
• Soft cloth or microfiber cloth
• Isopropyl alcohol (for cleaning)
• Optional: compressed air canister

Step 2: Prepare Your Workspace

• Choose a clean, well-lit area to work.
• Lay down a soft cloth to prevent scratches on your controller.
• Keep all tools within reach to streamline the disassembly process.

Step 3: Remove the Screws

1. Locate the Screws: Find the four screws at the back of the controller.
2. Unscrew: Use the Phillips screwdriver to carefully remove each screw. Keep them in a safe place to avoid losing them.

Step 4: Open the Controller

1. Insert the Pry Tool: Use the plastic prying tool to gently pry open the controller. Start at one end and work your way around to avoid damaging the casing.
2. Carefully Separate the Halves: Once the clips release, slowly pull apart the front and back halves of the controller.

Step 5: Remove the Battery

1. Locate the Battery: The battery is typically easy to spot once the controller is open.
2. Disconnect the Battery: Gently unplug the battery connector from the motherboard.

Step 6: Clean Internal Components

• Dust Removal: Use the compressed air to blow out dust from the internal components.
• Wipe Surfaces: Dampen a cloth with isopropyl alcohol and gently wipe down the circuit board and other surfaces to remove grime.

Step 7: Clean the Shell

1. Wipe the Outer Shell: Use the soft cloth with isopropyl alcohol to clean the exterior of both halves of the controller.
2. Focus on Buttons and Sticks: Ensure the analog sticks and buttons are thoroughly cleaned.

Step 8: Reassemble the Controller

1. Reconnect the Battery: Plug the battery back into the motherboard.
2. Align Halves: Carefully align the front and back halves of the controller.
3. Secure with Screws: Reinsert and tighten the screws you removed earlier.

Conclusion

Disassembling and cleaning your DualShock 4 controller can significantly improve its performance and lifespan. By following these steps, you can keep your gaming experience smooth and enjoyable. For future maintenance, consider cleaning your controller regularly and check for wear and tear on the buttons and sticks. Happy gaming!