How to Change Oil 2007-2013 Chevrolet Silverado

Introduction

This tutorial will guide you through changing the oil on a 2007-2013 Chevrolet Silverado. Regular oil changes are essential for engine health, and this step-by-step guide will help ensure you do it properly. The process is similar for various models within this range, making it a useful skill for any Silverado owner.

Step 1: Gather Necessary Tools

Before starting, ensure you have the following tools and materials ready:

• 15mm wrench
• 15mm socket
• Oil filter wrench
• Ratchet
• Socket extensions
• Torque wrench
• Brake parts cleaner
• Cloth rags
• Gloves
• Safety glasses
• Drain pan
• Funnel
• Engine oil (5W30 full synthetic)

Step 2: Remove the Engine Cover

• Use a 15mm socket to remove the four bolts securing the engine cover.
• Carefully pull down to remove the cover.

Step 3: Drain the Old Oil

• Locate the oil drain plug on the passenger side of the vehicle.
• Position your drain pan underneath the plug.
• Use a 15mm wrench to unscrew the drain plug and allow the oil to drain completely.
• Replace the seal on the drain plug if necessary (use a pick to remove the old seal and install a new one).
• Reinstall the drain plug and torque it to 18 foot-pounds.

Step 4: Remove the Oil Filter

• Ensure the drain pan is still in place to catch any oil.
• Use the oil filter wrench to loosen the oil filter.
• Once loose, twist it off by hand and allow any remaining oil to drain from the filter.

Step 5: Prepare and Install the New Oil Filter

• Check that the old filter's seal did not remain on the engine.
• Clean the surface where the new filter will be mounted.
• Apply a thin layer of fresh oil to the seal of the new filter. This helps with sealing and removal during the next change.
• Install the new filter by hand and tighten it until the seal is seated, then give it an additional three-quarters turn by hand.

Step 6: Reassemble and Fill with New Oil

• Reattach the engine cover and secure it with the previously removed bolts.
• Remove the oil cap and place a funnel in the opening.
• Pour in the new 5W30 full synthetic oil until the appropriate level is reached (refer to the engine cap for the exact specification).
• Replace the oil cap securely.

Step 7: Start the Engine and Check Oil Level

• Start the vehicle and let it run for about 15 seconds.
• Turn off the engine and pull out the dipstick to check the oil level. Add more oil if necessary.

Step 8: Reset the Oil Life Indicator

• Turn the key to the "on" position without starting the engine.
• Navigate to the oil life indicator on the dashboard.
• Press and hold the check mark button until it resets to 100%.

Conclusion

Congratulations! You have successfully changed the oil in your Chevrolet Silverado. Regular oil changes will help prolong the life of your engine and maintain optimal performance. Remember to keep track of your oil change intervals and gather all necessary materials before your next change. If you have any further maintenance needs, consult your vehicle’s manual or a professional mechanic.