2022 Mercedes Benz GLE350 Oil Change - M264 Engine 2.0L Turbo - DIY

3 min read 3 hours ago
Published on Jan 15, 2025 This response is partially generated with the help of AI. It may contain inaccuracies.

Table of Contents

Introduction

This tutorial provides a comprehensive, step-by-step guide to performing an oil change on a 2022 Mercedes Benz GLE350 with a 2.0L turbo engine. Changing your vehicle's oil is a crucial maintenance task that can enhance performance and prolong engine life. This DIY guide is designed to help you through the process confidently and efficiently.

Step 1: Gather Necessary Materials

Before you start, ensure you have all the required materials:

  • Oil: Pennzoil Euro L 5W-30 (meets MB 229.51 specification)
  • Oil filter: MANN filter (check with local auto parts store for correct part number)
  • Oil catch pan
  • Wrench set
  • Oil filter wrench
  • Funnel
  • Gloves and rags for cleanup

Practical Tip

Consider purchasing your oil and filter in advance and check local auto parts stores for availability, as some may not stock the specific parts you need.

Step 2: Prepare the Vehicle

  1. Park on a Level Surface: Ensure your vehicle is on a flat surface to prevent oil spillage.
  2. Warm Up the Engine: Start the engine and let it run for a few minutes to warm up the oil. This helps it drain more easily.
  3. Turn Off the Engine: After warming, turn the engine off and allow it to cool slightly.

Step 3: Drain the Old Oil

  1. Locate the Oil Drain Plug: Find the oil drain plug under the car.
  2. Place the Oil Catch Pan: Position your oil catch pan underneath the drain plug.
  3. Remove the Drain Plug: Using the appropriate wrench, carefully remove the drain plug and let the old oil drain completely into the pan.
  4. Replace the Drain Plug: Once drained, replace and tighten the drain plug securely.

Step 4: Replace the Oil Filter

  1. Locate the Oil Filter: Find the oil filter; it's usually near the engine block.
  2. Remove the Old Oil Filter: Use an oil filter wrench to unscrew the old filter. Expect some oil to spill, so have your catch pan ready.
  3. Prepare the New Oil Filter:
    • Apply a small amount of new oil to the rubber gasket of the new filter. This ensures a proper seal.
  4. Install the New Oil Filter: Screw the new filter into place until it is snug, but do not overtighten.

Step 5: Add New Oil

  1. Open the Oil Filler Cap: Locate and remove the oil filler cap on the engine.
  2. Use a Funnel: Insert a funnel into the opening to prevent spills.
  3. Add New Oil: Pour in the new Pennzoil Euro L 5W-30 oil. Use slightly over 7 quarts to ensure the computer indicates the maximum level.
  4. Replace the Oil Filler Cap: Once the oil is added, securely replace the oil filler cap.

Step 6: Check Oil Level and Start the Engine

  1. Check the Oil Level: After adding oil, wait a few minutes and then use the dipstick to check the oil level. Add more oil if necessary.
  2. Start the Engine: Start the engine and let it run for a minute. Check for any leaks around the oil filter and drain plug.
  3. Turn Off the Engine: After checking for leaks, turn off the engine.

Conclusion

Changing the oil in your 2022 Mercedes Benz GLE350 can be a straightforward process. By following these steps, you ensure your engine runs smoothly and efficiently. Remember to dispose of the old oil and filter properly at a recycling center. Regular oil changes will keep your vehicle performing at its best, so consider setting a schedule for future changes. Happy DIYing!