Vue Robotics // Installation Overview
2 min read
9 months ago
Published on Apr 23, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Title: Installation Overview of AR1 Device by Vue Robotics
Step 1: Gather the necessary tools and materials:
- Drill with a 5/16 bit
- Flathead screwdriver
- Zip ties
Step 2: Start by mounting the AR1 device in two different positions:
- Use the four adjustable metal bands provided with the device.
- Begin by placing two bands on the solar panel facing a Southward Direction.
- Then, mount the pole mount bracket with the other two adjustable metal bands.
Step 3: Choose between the two position options for mounting the AR1 device:
- 90° angle position
- Adjustable options at 10° and 25° positions
- Slide the firm take to provide a locking pin to secure the chosen position.
Step 4: Adjust the AR1 device to the desired angle:
- For the secondary position, which allows for 10° and 25° angular adjustments, insert the PIN to lock the device in place.
Step 5: Connect the solar connection line to the AR1 device:
- Align the three prongs of the solar connection with the prongs inside the device.
- Tighten the connection until it is snug.
Step 6: Install the AR1 device in the mobile app:
- Access your account in the mobile app.
- Click on "install new camera" in the top right corner.
- Follow the instructions provided by the Wizard in the app.
Step 7: Turn on the AR1 device using the magnetic key:
- Locate the magnetic key provided with the device.
- Use the fat portion of the key to hold it against the power button of the AR1 device for 5 to 10 seconds.
You have successfully installed and set up the AR1 device by Vue Robotics.