Easy AT&T BGW320 Gateway Bypass with UniFi UDM Pro Max via the WAS-110 SFP ONT on a stick from 8311

Introduction

This tutorial provides a step-by-step guide on how to bypass the AT&T BGW320 gateway using the UniFi UDM Pro Max in combination with the WAS-110 SFP ONT. By following this guide, you can enhance your network performance and manage your network infrastructure more effectively. This process involves using community firmware to configure your device for optimal use.

Step 1: Determine XGS-PON Subscription

Before proceeding, you need to confirm that you are an XGS-PON subscriber. This is crucial as it affects compatibility with the WAS-110 device.

• Visit the link provided: XGS-PON Subscriber Guide
• Follow the instructions to check your subscription status.

Step 2: Install the 8311 Community Firmware

The next step is to install the 8311 community firmware on your WAS-110 device. This firmware is necessary to bypass the AT&T BGW320 gateway.

• Access the firmware installation guide here: 8311 Community Firmware Installation
• Download the latest version of the firmware.
• Follow the installation instructions carefully, ensuring you back up any important settings on your current device.

Step 3: Configure the UniFi UDM Pro Max

After installing the firmware, you need to configure the UniFi UDM Pro Max to work with your new setup.

• Connect the UniFi UDM Pro Max to the WAN port of the WAS-110.
• Access the UniFi controller interface.
• Navigate to the WAN settings and configure the following:
  • Set the WAN type to DHCP.
  • Ensure that the MAC address is set to match the one used by your BGW320 gateway for a smoother transition.

Step 4: Test Your Connection

Once everything is configured, it’s time to test your connection to ensure that the bypass was successful.

• Restart both the WAS-110 and the UniFi UDM Pro Max.
• Check your internet connection by navigating to a website or running a speed test.
• If you encounter issues, double-check your configurations and ensure all devices are powered and connected properly.

Conclusion

By following these steps, you have successfully bypassed the AT&T BGW320 gateway using the WAS-110 and UniFi UDM Pro Max. This setup not only enhances your network speed but also gives you greater control over your internet settings. For further assistance or to join discussions around this setup, consider visiting the Discord community linked in the video description.