SSD Não Aparece na Bios? Bios Não Reconhece SSD? Solução! (Fácil)

Introduction

This tutorial addresses the common issue of an SSD not appearing in the BIOS. If your BIOS is not recognizing the SSD, it can lead to problems with system booting. This guide provides step-by-step solutions to troubleshoot and resolve the issue effectively.

Step 1: Check Physical Connections

• Ensure the SSD is properly connected to the motherboard.
• Follow these sub-steps:
  • Power down your computer and unplug it.
  • Open the case and locate the SSD.
  • Check both the SATA power and data cables are securely attached.
  • If necessary, try using different SATA ports on the motherboard.

Step 2: Update BIOS

• An outdated BIOS may not recognize newer SSDs.
• To update the BIOS:
  • Visit the motherboard manufacturer’s website.
  • Download the latest BIOS version for your specific motherboard model.
  • Follow the manufacturer's instructions to flash the BIOS, which may involve:
    • Creating a bootable USB drive.
    • Restarting the computer and entering BIOS setup.
    • Selecting the USB drive to perform the update.

Step 3: Configure BIOS Settings

• Sometimes, SSDs require specific settings to be recognized.
• Check these settings:
  • Boot your computer and enter BIOS setup (usually by pressing F2, DEL, or ESC during startup).
  • Look for options related to SATA configuration.
  • Ensure that the SATA mode is set to AHCI instead of IDE.
  • Check if the SSD is listed under the storage configuration section.

Step 4: Test on Another Computer

• To rule out hardware issues, test the SSD on another computer.
• Steps to follow:
  • Power down the other computer and open the case.
  • Connect the SSD to the system using the same method as before.
  • Boot the system to see if the SSD is recognized.

Step 5: Check for Disk Initialization

• If the SSD is new, it might need to be initialized.
• Follow these instructions:
  • Boot into Windows on a functioning computer.
  • Open Disk Management (right-click on Start and select Disk Management).
  • If the SSD appears as unallocated, right-click on it and choose "Initialize Disk."
  • Follow the prompts to set it up using GPT or MBR partition styles.

Conclusion

If your SSD is not appearing in the BIOS, the issue could be due to physical connections, outdated BIOS, incorrect settings, or it may need initialization. By following these steps, you can troubleshoot effectively. If the problem persists after these actions, consider seeking professional assistance or checking for potential hardware failures.