Полная замена масла в АКПП Honda CRV4, 2011.

Introduction

This tutorial provides a comprehensive guide on how to replace the transmission fluid in a 2011 Honda CR-V. Proper maintenance of the automatic transmission is crucial for ensuring the longevity and performance of your vehicle. This step-by-step process will help you complete the task efficiently and effectively.

Step 1: Gather Necessary Tools and Materials

Before starting the oil change, ensure you have all the required tools and materials:

• New transmission fluid (check your owner’s manual for specifications)
• Oil catch pan
• Funnel
• Socket wrench set
• Screwdrivers (flathead and Phillips)
• Rags or paper towels
• Safety glasses and gloves

Step 2: Prepare the Vehicle

• Park the Car: Ensure the vehicle is on a flat surface and engage the parking brake.
• Raise the Vehicle: Use a jack to lift the front of the car and secure it with jack stands for safety.

Step 3: Locate the Transmission Pan

• Find the transmission pan under the vehicle. It is usually a rectangular metal pan located towards the middle of the vehicle.

Step 4: Drain the Old Transmission Fluid

• Remove the Drain Plug: Use a socket wrench to carefully unscrew the drain plug at the bottom of the transmission pan.
• Catch the Fluid: Position the oil catch pan beneath the drain plug to collect the old transmission fluid as it drains out.
• Allow Complete Drainage: Wait until all the fluid has drained completely, which may take several minutes.

Step 5: Replace the Transmission Filter (if applicable)

• Remove the Pan: If your model requires it, you may need to remove the entire transmission pan. Unscrew all bolts and gently tap the pan to break the seal.
• Replace the Filter: Remove the old filter and replace it with a new one. Ensure it is securely in place.

Step 6: Reinstall the Transmission Pan

• Clean the Pan: Wipe down the transmission pan and the sealing surface on the transmission.
• Apply New Gasket: If necessary, apply a new gasket or sealant to ensure a proper seal.
• Reattach the Pan: Screw the transmission pan back into place, tightening the bolts securely without over-tightening.

Step 7: Add New Transmission Fluid

• Locate the Fill Tube: Find the transmission fluid fill tube, usually located near the top of the transmission.
• Use a Funnel: Insert a funnel into the fill tube and pour in the new transmission fluid according to the manufacturer's specifications.
• Check Fluid Level: After adding fluid, start the engine and let it run for a few minutes. Check the fluid level using the dipstick, adding more fluid if necessary.

Step 8: Dispose of Old Fluid

• Properly dispose of the old transmission fluid at a designated recycling center or auto parts store that accepts used oil.

Conclusion

Replacing the transmission fluid in your 2011 Honda CR-V is a straightforward process that can significantly enhance the vehicle's performance. Always refer to your owner's manual for specific fluid requirements and maintenance schedules. Regularly check your transmission fluid levels to avoid potential issues in the future. Happy driving!