VALVE PUZZLE SOLUTION

Introduction

This tutorial provides a step-by-step guide to solving the Hanayama Valve puzzle. Whether you're looking to disassemble or assemble the puzzle, this guide will detail the precise moves and rotations needed to successfully navigate the challenge.

Step 1: Disassembly of the Valve Puzzle

To begin the disassembly process, follow these steps carefully:

1. Identify the Starting Position

   • Hold the puzzle with the valve facing you. Make sure you are comfortable and have good visibility of all parts.

2. Locate the Key Areas for Movement

   • Identify the two main components of the puzzle that need to be separated. These are typically the parts that interlock.

3. Make Initial Rotations

   • Rotate the first piece clockwise while simultaneously applying gentle pressure to pull it apart from the other piece.

4. Continue to Rotate and Pull

   • As you rotate the first piece, slowly pull the second piece away. You may need to adjust the angle to find the right position for disassembly.

5. Complete the Disassembly

   • Once you feel both pieces begin to separate, continue to apply gentle pressure until they come apart completely.

Step 2: Assembly of the Valve Puzzle

After successfully disassembling the puzzle, follow these steps to reassemble it:

1. Align the Pieces

   • Start with the two disassembled pieces in front of you. Ensure they are oriented correctly; refer to the valve design for guidance.

2. Insert the First Piece

   • Take the first piece and slide it into the second piece's opening. This may require a slight twisting motion.

3. Engage the Mechanism

   • Once the pieces are close together, rotate the first piece counterclockwise while pushing it slightly inward to lock it into place.

4. Check for Proper Fit

   • Ensure both pieces are snugly fitted together without gaps. If they are not fitting well, you may need to repeat the previous step.

5. Final Adjustment

   • Make any final small rotations to ensure the pieces are fully assembled and functioning as intended.

Conclusion

The Hanayama Valve puzzle requires careful attention to detail and patience. By following the disassembly and assembly steps outlined in this tutorial, you should be able to master the puzzle with ease. If you encounter any difficulties, don't hesitate to reach out for assistance, and enjoy the challenge of solving this intricate puzzle!