Ремонт бензокосы Не глушится с кнопки

Introduction

In this tutorial, we will explore how to troubleshoot a gasoline trimmer that won't turn off using the stop button. This issue can be frustrating, but by following these steps, you can identify potential problems and apply effective solutions to ensure your trimmer operates smoothly.

Step 1: Identify the Symptoms

Before diving into repairs, it's essential to confirm the specific issue with your trimmer. Common symptoms include:

• The engine continues running even when the stop button is pressed.
• The trimmer behaves erratically when attempting to stop.

Step 2: Check the Stop Button

The first component to examine is the stop button itself. Follow these steps:

1. Inspect the Button: Ensure that the stop button is not stuck or damaged. Look for any signs of wear or corrosion.
2. Test the Connection: Use a multimeter to check the continuity of the button. If there is no continuity when pressed, the button may need replacement.

Step 3: Examine the Wiring

Next, focus on the wiring connected to the stop button:

1. Visual Inspection: Look for frayed or damaged wires. Pay attention to the connections leading to the ignition coil.
2. Test the Wires: Use a multimeter to check the electrical connectivity. Faulty wiring can prevent the stop signal from reaching the engine.

Step 4: Inspect the Ignition Coil

If the stop button and wiring appear to be in good condition, the ignition coil might be the culprit:

1. Check for Damage: Look for any visible cracks or signs of wear on the ignition coil.
2. Test the Coil: Use a multimeter to measure the resistance of the coil. Consult the manufacturer's specifications for the correct resistance values. If the readings are out of range, consider replacing the coil.

Step 5: Clean the Spark Plug

A dirty or faulty spark plug can also cause issues:

1. Remove the Spark Plug: Use a spark plug wrench to carefully remove the plug from the engine.
2. Inspect and Clean: Check for carbon buildup or damage. Clean the spark plug with a wire brush or replace it if necessary.
3. Reinstall: After cleaning or replacing the spark plug, reinstall it securely.

Step 6: Perform a General Maintenance Check

Regular maintenance can prevent many issues:

• Fuel System: Check for stale fuel or clogged fuel lines.
• Air Filter: Ensure the air filter is clean and free from debris.
• Overall Condition: Look for any loose screws, bolts, or components that require tightening.

Conclusion

By following these steps, you should be able to diagnose and resolve the issue of your gasoline trimmer not shutting off with the stop button. Regular maintenance and timely inspections can help prevent future problems. If the problem persists after these checks, consider consulting a professional for further assistance. Happy trimming!