How to Run the Xbox One/Series Kernel Exploit with a Raspberry Pi Pico - Collateral Damage Setup!

Introduction

This tutorial will guide you through the process of running the Xbox One/Series Kernel Exploit using a Raspberry Pi Pico, known as Collateral Damage. This exploit allows you to tinker with Xbox consoles that are on outdated Dashboard updates. Although primarily targeted at developers, this guide will help you set up your console and prepare the necessary scripts for the exploit.

Step 1: Gather Prerequisites

Before starting, ensure you have the following items:

• Xbox One or Xbox Series console on an outdated Dashboard update.
• Game Script application installed on your Xbox.
• Raspberry Pi Pico to act as a rubber ducky.
• Windows PC for additional setup.

Practical Tips

• Check your console version to confirm it is compatible.
• Ensure the Game Script application is functioning properly on your Xbox.

Step 2: Set Up Console Network

1. Connect your Xbox to your network.
2. Confirm that the console is connected to the internet for downloading necessary files.
3. Note down your console's IP address for later use.

Common Pitfalls

• Ensure that your Xbox is connected to the same network as your PC.
• If the connection fails, restart your router and console.

Step 3: Download Required Files

1. Go to the following links to download essential software:

   • Collateral Damage
   • pico-ducky
   • NetCat

2. Save the downloaded files to a dedicated folder on your PC.

Step 4: Prepare the Environment

1. Install the necessary drivers for the Raspberry Pi Pico if not already installed.
2. Open a terminal or command prompt on your PC.
3. Navigate to the folder where you saved the downloaded files.

Step 5: Prepare the Script

1. Open the pico-ducky folder and locate the script file.
2. Edit the script to include your Xbox's IP address.
3. Save the changes.

Example Script Modification

# Change this to your Xbox's IP address
set_ip 192.168.1.100

Step 6: Load the Script onto the Raspberry Pi Pico

1. Connect the Raspberry Pi Pico to your PC using a USB cable.
2. Use the appropriate command to upload the modified script to the Pico.
3. Confirm that the script has been uploaded successfully.

Step 7: Run the Script

1. Disconnect the Raspberry Pi Pico from your PC and connect it to your Xbox.
2. Power on your Xbox and navigate to the Game Script application.
3. Initiate the script from your Pico.

Important Note

Monitor the console for any prompts or errors that may appear during this process.

Step 8: Navigate the Xbox

1. Once the script runs successfully, navigate through the Xbox interface.
2. Look for any new options or changes that indicate successful execution of the exploit.
3. Follow any additional instructions provided by the exploit.

Conclusion

You have successfully set up and run the Collateral Damage exploit on your Xbox console using a Raspberry Pi Pico. This process allows you to explore and tinker with your console in new ways. For further development and troubleshooting, refer to the GitHub repositories linked above. Always ensure your console remains on an outdated update to maintain compatibility with this exploit.