How To Replace The Windshield On A Honda Goldwing (2001-2017) | CruisemansGarage.com

Introduction

In this tutorial, we will guide you through the process of replacing the windshield on a 2001-2017 Honda Goldwing. This step-by-step guide will help you save money by doing it yourself while ensuring you have a better understanding of your motorcycle maintenance.

Step 1: Gather Necessary Tools and Materials

Before starting, ensure you have the following items ready:

• New windshield (e.g., V Stream Special Edition)
• 10mm and 5mm wrenches
• Phillips screwdriver
• Microfiber cloth (to catch dropped bolts)
• Installation instructions (included with the windshield)

Step 2: Prepare the Motorcycle

1. Raise the Existing Windshield

   • Loosen the two levers on the fairing to raise the windshield to its highest position.

2. Adjust the Rearview Mirrors

   • Move the mirrors forward to access the bolt underneath.

3. Loosen the Rubber Gasket

   • Gently pop out the rubber gasket near the interior piece to prevent damage when removing the mirrors.

Step 3: Remove the Front Panel

1. Access the Bolts

   • Use a 10mm wrench to loosen the bolts revealed after moving the mirrors.

2. Catch Any Dropped Bolts

   • Place a microfiber cloth underneath to catch any bolts that may fall.

3. Remove the Front Panel

   • After loosening the bolts, pull out the rubber tabs holding the gasket, then gently pop off the front panel.

Step 4: Remove the Old Windshield

1. Access the Center Bolt

   • With the windshield in the highest position, locate and remove the center 5mm hex bolt.

2. Lower the Windshield

   • Lower it slightly to access the side screws.

3. Remove Side Screws

   • Use a Phillips screwdriver to remove the two screws on each side of the windshield.

4. Remove Remaining Fixings

   • Unscrew the last two 5mm hex bolts at the bottom center and remove the old windshield.

Step 5: Install the New Windshield

1. Position the New Windshield

   • Align the new windshield with the mounting holes.

2. Install Rubber Guides

   • Attach the rubber guides to the flat surface underneath the metal bar for smoother operation and reduced vibrations.

3. Secure the Windshield

   • Reinstall the bolts from the center and sides, ensuring everything is snug.

4. Adjust the Bottom Bracket

   • Loosen or remove the 8mm bolt at the bottom front of the bracket for better alignment during installation.

5. Final Adjustments

   • Ensure the new windshield is properly aligned and tightened before proceeding.

Step 6: Reattach the Front Panel

1. Replace the Front Panel

   • Carefully position the front panel back in place and secure it with the bolts behind the mirrors.

2. Reinstall Rubber Gasket

   • Ensure the rubber gasket is properly reinserted to avoid wind noise.

Conclusion

Congratulations on successfully replacing the windshield on your Honda Goldwing! Remember to test it out on a ride to ensure everything is secure and functioning properly. Regular maintenance will keep your bike in great shape, so consider watching more of Cruiseman's maintenance videos for additional tips and tricks.