Как клеить ОБОИ ПРАВИЛЬНО своими руками одному на стены быстро. Поклейка обоев флизелиновые

Introduction

This tutorial provides a comprehensive guide on how to correctly and quickly apply non-woven wallpaper to concrete walls. It is designed for those who want to tackle wallpapering on their own, covering everything from preparing the walls to finishing touches.

Step 1: Gather Your Materials

Before starting, ensure you have the following tools and materials:

• Non-woven wallpaper
• Wallpaper adhesive (ensure it is suitable for non-woven wallpaper)
• A smoothing tool (like a wallpaper brush or plastic scraper)
• A utility knife or wallpaper cutter
• A measuring tape
• A level for straight lines
• A pencil for marking
• A paint roller or brush for applying glue
• A sponge for cleaning

Practical Tips

• Choose a wallpaper pattern that suits your space.
• Ensure the adhesive is mixed according to the manufacturer's instructions.

Step 2: Prepare the Walls

1. Clean the Surface: Remove any dust, dirt, or old wallpaper from the walls.
2. Assess the Walls: Check for any cracks or holes. Fill them as needed.
3. Measure and Mark: Use your measuring tape and level to mark vertical lines where the wallpaper will be applied, ensuring they are straight.

Common Pitfalls to Avoid

• Neglecting to clean the walls can lead to poor adhesion.
• Not using a level can result in crooked wallpaper.

Step 3: Mix the Adhesive

1. Follow Instructions: Mix the wallpaper adhesive according to the manufacturer's directions.
2. Application Tools: Use a paint roller or brush to apply the adhesive evenly.

Practical Advice

• It’s advisable to only apply adhesive to the walls, as this makes handling the wallpaper easier.

Step 4: Cut the Wallpaper

1. Measure the First Strip: Measure the height of the wall and add a few extra centimeters to the length for trimming.
2. Cut the Wallpaper: Use a utility knife or wallpaper cutter to make clean cuts.

Tips for Accuracy

• Double-check your measurements before cutting to avoid waste.

Step 5: Apply the Wallpaper

1. Position the Wallpaper: Align the top of the strip with the marked line on the wall.
2. Smooth it Out: Use your smoothing tool to press the wallpaper onto the wall, starting from the top and moving downward.
3. Remove Air Bubbles: If air bubbles form, gently lift the wallpaper and smooth it down again.

Helpful Techniques

• Working from top to bottom and center outwards helps minimize bubbles.

Step 6: Trim Excess Wallpaper

1. Use a Utility Knife: Carefully trim the excess wallpaper at the bottom and edges, ensuring a clean finish.
2. Check the Corners: Pay special attention to corners and edges, making sure they are neatly finished.

Final Touches

• Use a sponge to clean any excess adhesive from the surface of the wallpaper.

Conclusion

Applying non-woven wallpaper is a manageable DIY project with the right tools and techniques. Remember to prepare your walls properly, apply adhesive correctly, and take your time with measuring and cutting. With these steps, you can achieve a professional-looking finish in your room. For further improvements or ideas, consider exploring other renovation tips or projects to enhance your living space.