Himiway eBike *Tips & Tricks*

Introduction

This tutorial provides step-by-step instructions on how to adjust the speed limit and pedal assist levels on your Himiway eBike. By fine-tuning these settings, you can enhance your riding experience and customize the bike’s performance to meet your needs.

Step 1: Adjusting the Speed Limit

1. Access the Settings

   • Press and hold the plus (+) and minus (-) buttons simultaneously for two seconds.

2. Enter the Password

   • Press and hold the minus (-) button and the i (information) button, then release both.
   • The first digit will flash, indicating it’s time to enter the password. The default password is 0510.
   • Use the i button to move to the next digit and the plus (+) button to change the numbers:
     • First digit: 0 (no change needed)
     • Second digit: Press + until it shows 5
     • Third digit: Press + until it shows 1
     • Fourth digit: 0 (no change needed)

3. Confirm the Password

   • Press the i button to proceed.

4. Set the Maximum Speed

   • You will see the speed limit screen. The current limit is usually set between 25-28 mph, but you can change it up to 90.
   • Use the plus (+) and minus (-) buttons to adjust to your desired speed (e.g., 90).
   • Press the i button to save the settings.

5. Exit the Settings

   • To save all changes, press and hold the i button for two seconds to return to the main screen.

Step 2: Setting the Pedal Assist Levels

1. Access the Pedal Assist Settings

   • Again, press and hold the plus (+) and minus (-) buttons for two seconds.
   • Then press and hold minus (-) and i to enter the password, using 0510 as described in Step 1.

2. Select the Pedal Assist Screen

   • After confirming the password, you will see screen one. Press the plus (+) button to navigate to screen two.
   • Press the i button to enter screen two.

3. Set the Assist Levels

   • You will see a flashing number in the bottom left corner (0-9):
     • Default is often set to 05. Adjust it according to your preference:
       • Example settings: 0 (no assist), 5 (low assist), 9 (high assist).
   • Press the i button to confirm the selection.

4. Adjust the Power Level Settings

   • For each pedal assist level (1-9):
     • Level 1: Set the power percentage (e.g., 25%).
     • Level 2: Set the power percentage (e.g., 30%).
     • Level 3: Set the power percentage (e.g., 40%).
     • Continue this for all levels, adjusting as needed based on your riding style.

5. Save the Settings

   • After adjusting the percentages, hold the i button to save your changes.

6. Return to Main Menu

   • Hold the i button again to exit back to the main screen.

Conclusion

By following these steps, you can effectively customize your Himiway eBike's speed limit and pedal assist levels to enhance your riding experience. Experiment with different settings to find what works best for you. For further tips and tricks, consider subscribing to channels like E-Ryders for regular updates and tutorials. Happy riding!