Mercedes-Benz 10.25" Android Screen Install (Full installation + review)

Introduction

This tutorial provides a comprehensive guide on how to install a 10.25" Android display in a 2016 Mercedes-Benz C63S, applicable to all C-Class models (W205). The new screen enhances your vehicle with wireless Apple CarPlay, wired Android Auto, and various Android features. Follow these detailed steps to successfully complete the installation.

Step 1: Prepare for Installation

• Gather the necessary tools: Torx 20 screwdriver, plastic panel removal tool, microfiber cloth, and zip ties.
• Make sure the vehicle is turned off and the keys are removed from the ignition.
• Cover the existing screen with a microfiber towel to prevent scratches.

Step 2: Remove the Existing Panel

• Carefully remove the silver trim by:
  • Pulling it upwards while pressing the two tabs simultaneously.
• Unscrew two Torx 20 screws located beneath the trim.
• Gently pull the panel towards yourself while unplugging four connectors and three additional plugs around the screen.

Step 3: Remove the Factory Radio

• Locate and remove two more Torx 20 screws holding the radio in place.
• Pull the radio out using the tabs and carefully unplug all connectors from the back.

Step 4: Remove the Existing Screen

• Remove the top panel held by six clips using the plastic panel removal tool.
• Unscrew two Torx 20 screws located directly under the clips.
• Gently pull the screen back and unplug the LVDS cable (may be tight).

Step 5: Remove the Glove Box

• Unscrew the Torx 20 screw on the right side and five screws located inside the glove box.
• Pull the glove box out and unplug any connectors.

Step 6: Install the New Wiring Harness

• Connect the new wiring harness to the factory quad lock connector:
  • Ensure the fiber optic connection is in the same position as it was.
• Tape up any unused wires and route the harness behind the dash towards the screen area.
• If the car is not coded for AUX, use the provided adapter to connect to the USB ports.

Step 7: Position the New Screen

• Connect the new screen’s cables:
  • Silver 4G antenna and larger plug on one side, gold GPS antenna and smaller plug on the other.
• Slide the mounting hardware into place and secure with the original screws.

Step 8: Connect Antennas

• Mount the GPS antenna high on the A-pillar:
  • Remove the airbag cover and clip to access space behind the airbag.
• Secure both the GPS and Wi-Fi antennas together and run the cables towards the screen.

Step 9: Reassemble the Dashboard

• Carefully reinsert the factory radio and reconnect all plugs.
• Reattach the center trim panel and ensure everything is securely in place.

Step 10: Testing the New Screen

• Turn on the vehicle ignition and verify the screen powers on.
• Access the NTG menu to adjust display settings:
  • Use the following code: factory 1314 to enter settings.
  • Adjust the display size to fit properly.
• Test sound by changing the source to AUX and playing media.
• Connect to Wi-Fi and Bluetooth for full functionality.

Conclusion

You have successfully installed the 10.25" Android display in your Mercedes-Benz C-Class. Make sure to check all functions, including wireless Apple CarPlay and Android Auto. For any questions or troubleshooting, refer to the comments section of the video or consult the user manual for the device. Happy driving!