[Eps 57] Colet Warna Indigosol, Gampangggg

Introduction

In this tutorial, we will explore the art of batik using indigosol dye, as demonstrated in the video by Tholo Thili. This guide will provide you with the necessary steps and precise measurements for a successful batik creation process. Whether you're new to batik or looking to refine your skills, this tutorial is designed to help you achieve beautiful results.

Step 1: Preparing Your Materials

Before starting, gather all the necessary materials:

• Indigosol dye
• Wax for batik (e.g., beeswax or paraffin)
• Fabric (preferably cotton or silk)
• Tools (tjanting tool or brush for applying wax)
• Containers for mixing dye
• Protective gloves and apron

Practical Tips

• Ensure your workspace is well-ventilated.
• Wear old clothes or an apron to protect against stains.

Step 2: Mixing the Indigo Dye

Follow these steps to prepare your indigosol dye:

1. Measure the indigosol powder: Use the recommended ratio specified on the package (usually around 1:10 for dye to water).
2. Mix with water: Gradually add warm water to the indigosol powder in a container, stirring continuously until fully dissolved.
3. Strain the mixture: To avoid clumps, strain the dye through a fine mesh or fabric.

Common Pitfalls

• Avoid using too much dye, which can lead to overly dark colors.
• Ensure the dye is well-mixed to prevent uneven coloring.

Step 3: Preparing the Fabric

Prepare your fabric for dyeing:

1. Wash the fabric: Remove any finishes or dirt that may affect dye adherence.
2. Soak the fabric: Immerse it in a mixture of water and a fixative (like salt) for about 30 minutes, then rinse and let it dry slightly.

Practical Advice

• Pre-soaking helps the dye to penetrate the fabric more evenly.

Step 4: Applying the Wax

Using your tjanting tool or brush, apply wax to create your design:

1. Draw your design: Carefully outline your patterns on the fabric with the wax.
2. Let the wax harden: Allow the wax to cool and solidify before proceeding.

Tips for Success

• Practice on scrap fabric first if you're new to applying wax.
• Keep the tjanting tool at a consistent angle for even lines.

Step 5: Dyeing the Fabric

Now it's time to dye your fabric:

1. Submerge the fabric in the dye bath: Ensure it is fully immersed for about 10-15 minutes.
2. Check the color: Remove the fabric and rinse it in cold water until the water runs clear.
3. Repeat if necessary: For a darker shade, repeat the dyeing process.

Important Note

• Handle the dyed fabric carefully to avoid smudging the wax.

Step 6: Removing the Wax

Once the fabric is fully dried, remove the wax:

1. Place the fabric between two layers of newspaper or fabric.
2. Iron gently: Use a warm iron to melt the wax, which will be absorbed by the newspaper.
3. Repeat as necessary: Change the newspaper as it becomes saturated with wax.

Final Tips

• Ensure the iron is not too hot to avoid damaging the fabric.

Conclusion

You have now completed your indigosol batik project! Remember to enjoy the process and experiment with different designs and techniques. If you're interested in further honing your batik skills, consider reaching out to Tholo Thili for exclusive training sessions. Happy crafting!