The BEST video on How To Replace the Tail Light Bulb on a RAM 1500 - SO EASY!!

Introduction

This tutorial will guide you through the simple process of replacing the tail light bulb on a 2016 RAM 1500. This task is easy to accomplish and can save you time and money. Follow these step-by-step instructions to ensure your tail lights are functioning properly.

Step 1: Gather Your Supplies

Before starting, make sure you have the following items ready:

• Replacement bulb (Sylvania 3157K)
• T25 Torx driver
• Clean cloth (optional)

Step 2: Open the Tailgate

• Begin by opening the tailgate of your RAM 1500 to access the tail light assembly.

Step 3: Remove the Torx Screws

• Locate the two T25 Torx screws inside the tailgate area:
  • One screw at the bottom
  • One screw at the top
• Use the T25 Torx driver to remove these screws. They should not be very tight, so you can loosen them by hand.

Step 4: Release the Tail Light Assembly

• After removing the screws, the tail light assembly will be loose, but it won't come off immediately due to two plastic clips.
• Gently pull straight back on the assembly to disengage the clips. Be careful not to break these clips, as they are plastic.

Step 5: Replace the Bulb

• With the tail light assembly removed, locate the bulb socket.
• Turn the upper bulb socket a quarter turn counterclockwise to release it.
• Pull the bulb straight out of the socket.
• Take your new bulb and wipe it with a clean cloth to remove any oils from your fingers, which can affect the bulb's performance.
• Insert the new bulb into the socket, ensuring it fits securely. Twist the socket back into place to lock it.

Step 6: Reinstall the Tail Light Assembly

• Align the U-shaped clips on the tail light assembly with the slots in the vehicle.
• Push the assembly back into place until you hear a snap, indicating that the clips are secured.

Step 7: Secure the Assembly with Screws

• Reinstall the two T25 Torx screws that you previously removed.
• Tighten them by hand, ensuring they are snug but not overly tight.

Conclusion

Replacing the tail light bulb on your RAM 1500 is a straightforward task that can be completed in just a few minutes. By following these steps, you can ensure your vehicle remains safe and compliant with road regulations. If you have any questions or need further assistance, feel free to leave a comment. Happy driving!