FS24: Fly the Vision Jet - Part 2: VNAV descent, G3000 Visual Approaches, and Landing

Introduction

In this tutorial, you will learn how to operate the Garmin G3000-equipped SF50 Cirrus Vision Jet in Microsoft Flight Simulator 2024. This guide will cover descending using Vertical Navigation (VNAV), programming a Visual Approach, and executing a smooth landing.

Step 1: Enabling the MFD Inset Window

• Access the Multi-Function Display (MFD).
• Enable the inset window to view additional flight information.
• Familiarize yourself with the various data presented in the inset for better situational awareness.

Step 2: Setting Up Career Mode Flight Plans

• Navigate to the flight plan section in Career Mode.
• Input your desired departure and destination airports.
• Ensure the flight plan is correctly configured for your mission.

Step 3: Selecting an Approach in the G3000

• Access the approach menu on the G3000.
• Choose the desired approach from the list available for your destination airport.
• Confirm your selection to integrate the approach into your flight plan.

Step 4: Removing Extra Waypoints

• Identify any extra waypoints in your flight plan that are not needed.
• Use the G3000 interface to delete these waypoints for a cleaner navigation route.

Step 5: Using VNAV for Descent

• Activate VNAV on the G3000 to manage your vertical descent.
• Monitor your altitude and descent rate as you approach your Top of Descent (TOD).
• Adjust the descent profile as necessary to maintain a safe and controlled descent.

Step 6: Climbing Higher While in Cruise

• If you need to change altitude during cruise, make adjustments using the G3000's altitude settings.
• Ensure you follow proper flight procedures and air traffic control instructions when altering your altitude.

Step 7: Handling Missed Waypoints

• If you miss a mission waypoint, use the Direct-To function on the G3000.
• Input the next waypoint to navigate directly towards your intended path.

Step 8: Customizing the MFD Data Fields

• Personalize the data fields displayed on the MFD to suit your flying preferences.
• Ensure that critical information, such as speed and altitude, is easily visible.

Step 9: Understanding Gear and Flap Speed Limitations

• Familiarize yourself with the limitations for deploying gear and flaps.
• Ensure that you are at the correct speeds before extending flaps and landing gear.

Step 10: Reaching the Top of Descent

• Monitor your descent and ensure you reach your TOD point accurately.
• Begin descent preparations and adjust your speed as needed.

Step 11: Adjusting Autothrottle Descent Speed

• Change the autothrottle settings to control your descent speed effectively.
• Make sure to slow down appropriately as you approach the final approach phase.

Step 12: Final Approach Preparations

• Disable autothrottle when preparing for landing to maintain manual control.
• Ensure vertical guidance is activated for a stable approach.

Step 13: Configuring for Landing

• Lower the landing gear and extend full flaps at the appropriate altitude and speed.
• Verify that all landing configurations are set before reaching the runway.

Step 14: Executing the Landing

• Focus on your approach path and maintain control through any crosswinds.
• Adjust your landing technique as needed to compensate for environmental factors.

Step 15: Post-Landing Procedures

• Once landed, remember to turn off the Flight Director.
• Taxi to your designated parking area and shut down the aircraft systems properly.

Conclusion

By following these steps, you can successfully navigate the SF50 Cirrus Vision Jet during descent, approach, and landing in Microsoft Flight Simulator 2024. Practice these techniques to improve your flying skills, and explore further tutorials for additional tips and advanced maneuvers. Happy flying!