How to install your 2012-2018 Ford Focus fender | ReveMoto
2 min read
8 hours ago
Published on Mar 21, 2025
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
This tutorial will guide you through the installation of a fender on a 2012-2018 Ford Focus. Whether you're replacing a damaged fender or upgrading your vehicle's appearance, this step-by-step guide will ensure a precise and effective installation.
Step 1: Prepare Your Tools
Before starting, gather the necessary tools:
- 10mm socket wrench for bolt installation
- Panel clip removal tool (or a flat-head screwdriver)
Step 2: Mount the Fender
- Position the fender in front of the center bracket near the door.
- Ensure it sits correctly without any gaps.
- Insert a top bolt to hold the fender in place temporarily.
Step 3: Check Alignment and Spacing
- Before tightening any bolts, check the alignment of the fender with the door and hood.
- Adjust as necessary to ensure even spacing on both sides.
Step 4: Install the Fender Bracket
- Locate the fender bracket that was missed during the initial installation.
- Secure it using the two small brackets provided with the new fender.
Step 5: Secure the Fender Bolts
- Begin securing all the fender bolts firmly.
- Make sure that all bolts are tightened evenly to avoid any misalignment.
Step 6: Install the Headlight
- With the fender secured and properly spaced, install the headlight.
- Ensure it fits snugly within the fender for a clean look.
Step 7: Secure the Rocker Panel
- Locate the two small bolts on the rocker panel.
- Tighten these bolts to secure the rocker panel in place.
- Snap the rocker panel back onto the fender.
Step 8: Secure the Bumper
- Finally, attach the bumper end to the fender.
- Ensure it is securely fastened to complete the installation.
Conclusion
You have successfully installed a new fender on your Ford Focus! Remember to double-check all bolts for tightness and alignment. If you encounter any issues, refer back to the steps above or seek additional assistance. Enjoy your newly installed fender!