Removing Sticky Rubber from Gadgets

Tutorial: Removing Sticky Rubber Coating from Gadgets

Materials Needed:

1. Isopropyl alcohol
2. Paper towels or a soft cloth
3. Optional: WD-40

Step 1: Identify the Sticky Rubber Coating

• Locate the gadget with the sticky rubber coating that needs to be removed. In the video, the Black Widow joystick with throttle control and a Tesco electric drill are used as examples.

Step 2: Prepare the Workspace

• Lay down a clean surface to work on and ensure good ventilation in the area.

Step 3: Testing with WD-40 (Optional)

• If you want to test WD-40 as a solution, apply a small amount on a cloth or paper towel and gently rub it on the sticky rubber coating. Assess if it helps in removing the stickiness.

Step 4: Using Isopropyl Alcohol

• Moisten a paper towel or a soft cloth with isopropyl alcohol.
• Gently rub the moistened cloth on the sticky rubber coating in circular motions. The alcohol will help dissolve the rubber residue.

Step 5: Removing the Sticky Rubber Coating

• Continue rubbing with isopropyl alcohol until the sticky rubber coating starts to come off.
• If needed, repeat the process until the rubber residue is completely removed.

Step 6: Cleaning the Gadget

• Once the sticky rubber coating is removed, wipe down the gadget with a clean, dry cloth to remove any remaining residue.

Step 7: Final Checks

• Inspect the gadget to ensure all traces of the sticky rubber coating are removed.
• If necessary, repeat the process in stubborn areas.

Step 8: Post-Treatment (Optional)

• If desired, you can use a small amount of WD-40 to clean and protect the surface after removing the sticky rubber coating.

Step 9: Maintenance Tips

• To prevent the rubber from becoming sticky again, store the gadget in a cool, dry place away from direct sunlight.

Step 10: Conclusion

• Isopropyl alcohol is an effective solvent for removing sticky rubber coatings from gadgets. It dries quickly and leaves the surface clean.
• Remember to dispose of used paper towels or cloths properly.

By following these steps, you can successfully remove sticky rubber coatings from your gadgets using isopropyl alcohol.