The FASTEST Way to Replace Your iPhone 7 Plus LCD Screen in 2024!

Introduction

Replacing the LCD screen on an iPhone 7 Plus can seem daunting, but with the right tools and guidance, it's a manageable DIY project. This tutorial walks you through the process step-by-step, making it easier for both experienced technicians and first-time repairers.

Step 1: Gather Your Tools

Before starting, ensure you have all the necessary tools at hand. This will help you work efficiently and avoid interruptions.

• Phillips screwdriver
• Pentalobe screwdriver
• Plastic opening tools
• Suction cup
• Tweezers
• New LCD screen
• Magnetic mat or container for screws

Tip: Organize your screws by their location to prevent confusion during reassembly.

Step 2: Power Off the Device

Always begin by turning off your iPhone to avoid any electrical issues during the repair.

• Press and hold the power button until the "slide to power off" slider appears.
• Slide to turn off your device completely.

Step 3: Remove the Screws

Next, you'll need to remove the screws securing the screen.

1. Use the pentalobe screwdriver to remove the two screws located next to the charging port.
2. Place the screws in your organized container.

Caution: Be careful not to mix up the screws, as using the wrong ones can damage your device.

Step 4: Open the Screen

Now, it’s time to separate the screen from the body of the phone.

1. Use the suction cup to gently lift the screen from the bottom edge.
2. Insert a plastic opening tool into the gap and slide it around the edges to detach the screen.

Tip: Work slowly to avoid damaging the clips that hold the screen in place.

Step 5: Disconnect the Battery

Before proceeding with other connections, disconnect the battery to ensure safety.

1. Locate the battery connector and remove the screws securing it.
2. Gently lift the connector using a plastic tool.

Step 6: Remove the Broken LCD

With the battery disconnected, you can now remove the broken LCD screen.

1. Disconnect the display cables by removing the screws holding the connectors.
2. Gently lift the broken LCD from the frame.

Pitfall to Avoid: Do not rush this step, as cables can be fragile and may break if pulled too hard.

Step 7: Install the New LCD

Now it’s time to install your new LCD screen.

1. Position the new LCD screen in place.
2. Connect the display cables and secure them with screws.

Tip: Ensure that all connections are tight and properly seated to avoid display issues.

Step 8: Reconnect the Battery

Once the new LCD is in place, reconnect the battery.

1. Align the battery connector and press it down firmly.
2. Secure it with screws.

Step 9: Close the Device

Now that everything is connected, it’s time to put your iPhone back together.

1. Carefully align the screen with the body of the phone.
2. Press down gently until you hear clicks indicating that the clips have secured the screen.

Step 10: Replace the Screws

Finish the repair by replacing the screws you removed earlier.

1. Use the pentalobe screwdriver to tighten the screws next to the charging port.
2. Double-check that all screws are in their correct locations.

Conclusion

Congratulations! You have successfully replaced the LCD screen on your iPhone 7 Plus. Remember to power on your device and check for proper functionality. If you encounter any issues, review your connections and ensure everything is securely in place. With practice, you can efficiently handle more smartphone repairs in the future.