iPhone 11 Screen Replacement

Introduction

This tutorial provides a step-by-step guide for replacing the screen on an iPhone 11 (models A2111, A2223, A2221). Whether your screen is cracked or not functioning properly, this guide will help you through the process using tools and materials that can be found online.

Step 1: Gather Necessary Tools and Parts

Before starting the replacement, ensure you have all the required tools and components.

Required Items:

• New iPhone 11 LCD Screen
• Water and dust seal tape
• Screwdriver kit (including pentalobe and Phillips screwdrivers)
• Pry tool
• Tweezers

Where to Purchase:

• Amazon links:
  • iPhone 11 LCD Screen
  • Water and dust seal tape
  • Screwdriver Kit
  • Pry Tool
• eBay links:
  • LCD Screen

Step 2: Power Off the iPhone

• Hold the side button and either volume button until the power off slider appears.
• Slide to power off the device completely.

Step 3: Remove Screws

• Use the pentalobe screwdriver to remove the two screws located near the charging port.
• Keep screws organized for reassembly.

Step 4: Open the iPhone

• Use the pry tool to gently lift the screen from the body.
• Start from the bottom edge and work your way around the sides.
• Be cautious of the Face ID connector located at the top.

Step 5: Disconnect the Battery

• Locate the battery connector and use the Phillips screwdriver to remove the screws securing the connector.
• Gently disconnect the battery to ensure safety while working on the screen.

Step 6: Remove the Old Screen

• Disconnect the screen connectors carefully using the pry tool or tweezers.
• Once disconnected, you can lift the old screen away from the device.

Step 7: Install the New Screen

• Connect the new screen connectors to the motherboard.
• Ensure they are securely attached and seated properly.

Step 8: Reconnect the Battery

• Reattach the battery connector and secure it with the screws you removed earlier.

Step 9: Close the iPhone

• Carefully align the new screen with the body of the iPhone.
• Press down around the edges to snap the screen back in place.

Step 10: Replace Screws

• Reinsert the two pentalobe screws near the charging port to secure the screen.

Step 11: Power On the iPhone

• Press and hold the side button until the Apple logo appears.
• Check the functionality of the new screen and ensure everything is working correctly.

Conclusion

You have successfully replaced the screen on your iPhone 11. Remember to test all functionalities, including touch response and display quality. If you encounter any issues, revisit the steps to ensure all connections are secure. Enjoy your new screen, and consider keeping the old one as a backup for parts!