Ich habe ALLE Tricks zum Dübel aus der Wand ausprobiert

Introduction

This tutorial will guide you through various effective methods to remove wall anchors (Dübel) from your walls. Whether you're renovating, redecorating, or simply need to make repairs, these techniques will help you extract stubborn plastic wall plugs without damaging your walls.

Step 1: Using Needle-Nose Pliers

• Identify the anchor: Locate the anchor you wish to remove.
• Grip the anchor: Use needle-nose pliers to firmly grasp the anchor.
• Twist and pull: Slowly twist the pliers while pulling outward to dislodge the anchor from the wall.

Step 2: Employing a Corkscrew

• Choose a corkscrew: Select a corkscrew with a long screw.
• Insert into the anchor: Screw the corkscrew into the center of the anchor.
• Pull the anchor out: Once the corkscrew is secure, gently pull on it to remove the anchor from the wall.

Step 3: Best Method - Combination Pliers

• Select combination pliers: These provide better leverage than standard pliers.
• Grip the anchor: Position the pliers around the anchor.
• Pull steadily: Apply even pressure while pulling outward. This method is efficient for many types of anchors.

Step 4: Using a Screw Hook

• Get a screw hook: A screw hook can also aid in anchor removal.
• Screw it into the anchor: Twist the screw hook into the anchor until it’s secure.
• Pull the anchor out: Use the hook to pull the anchor out of the wall.

Step 5: Countersinking the Anchor

• Drill a small hole: If the anchor is flush with the wall, drill a small hole above it to countersink.
• Push the anchor deeper: Use a screwdriver to push the anchor further into the wall.
• Fill the hole: After removal, fill the hole with spackle or putty for a smooth finish.

Step 6: Cutting the Anchor

• Use a utility knife: Carefully cut around the anchor’s edges.
• Remove the outer part: Once cut, you can often remove the outer portion of the anchor.
• Smooth the area: Sand down any rough edges left on the wall.

Step 7: Drilling Out the Anchor

• Select the right drill bit: Choose a bit slightly larger than the anchor.
• Drill into the anchor: Carefully drill into the center of the anchor.
• Extract the remains: Once the anchor is weakened, it should pop out easily.

Step 8: Tips for Filling Holes

• Use spackle or joint compound: After removing the anchors, fill the holes with spackle or joint compound.
• Smooth and finish: Once dry, sand the area to ensure it’s flush with the wall for painting.

Conclusion

Removing wall anchors doesn't have to be a daunting task. By using these techniques—such as pliers, corkscrews, and even drilling—you can effectively remove stubborn anchors while minimizing wall damage. Remember to fill any holes afterward for a clean finish. Experiment with these methods to find the one that works best for your specific situation. Happy DIYing!