Easy Ring Doorbell Installation | Hardwiring a Ring Pro 2

Introduction

Upgrading to a smart doorbell is a great way to enhance your home security. This tutorial will guide you through the process of hardwiring a Ring Pro 2 video doorbell. Whether you're replacing an old doorbell or installing a new one, these steps will help you complete the installation efficiently.

Step 1: Cut the Power

Before beginning any electrical work, safety is paramount. Follow these steps:

• Locate your home's circuit breaker panel.
• Turn off the power to the existing doorbell circuit to prevent any electrical accidents.

Step 2: Attach the Power Pro Kit

The Power Pro Kit helps provide adequate power to your Ring doorbell. Here's how to install it:

• Open the Power Pro Kit box.
• Identify the components included, such as the transformer and wiring connectors.
• Connect the transformer wires to your existing doorbell wires, ensuring a secure fit.

Step 3: Remove Your Old Doorbell

If you're replacing an existing doorbell, follow these steps:

• Unscrew and carefully remove the old doorbell from the wall.
• Disconnect the wires attached to it; make sure to note which wire is connected to which terminal.

Step 4: Add the Backplate

Installing the backplate is essential for mounting the Ring doorbell. Here’s how:

• Position the backplate against the wall where the old doorbell was located.
• Use a level to ensure it’s straight, then mark the drill holes.
• Drill holes and use anchors if necessary, then attach the backplate securely to the wall.

Step 5: Wire the Doorbell

Now it’s time to connect the wires to the new doorbell:

• Take the wires coming from the wall and connect them to the corresponding terminals on the Ring doorbell.
• Ensure the connections are tight to avoid any power issues.

Step 6: Attach the Doorbell

With the wiring complete, it’s time to mount the doorbell:

• Align the Ring doorbell with the backplate.
• Press it gently into place and secure it using the provided screws.

Step 7: Add in the Ring App

To complete your setup, you need the Ring app:

• Download the Ring app from your device's app store.
• Create an account or log in if you have one.
• Follow the in-app instructions to connect your doorbell to your Wi-Fi network and customize your settings.

Conclusion

Congratulations on successfully installing your Ring Pro 2 video doorbell! By following these steps, you’ve enhanced your home security with a smart device. For further customization and troubleshooting, refer to the Ring app or the Ring website. Enjoy peace of mind with your new doorbell!