How to Backup one Synology NAS to Another Synology for an Offsite backup using HyperBackup

Introduction

This tutorial will guide you through the process of backing up one Synology NAS to another for offsite storage using Hyper Backup. This method is essential for protecting your data against potential disasters such as fire, water damage, or theft. Whether you're a home user wanting to keep your data safe at a friend's house or a small business looking for reliable backup solutions, this guide will provide clear steps to set up your offsite backup with Synology devices.

Step 1: Prepare Your Synology NAS Devices

Before starting the backup process, ensure you have two Synology NAS devices ready:

• Primary NAS: The device you want to back up.
• Offsite NAS: The secondary device where the backup will be stored, which can be located at a different physical location.

Practical Tips:

• Consider using a budget-friendly model, such as the Synology J series, for the offsite NAS.
• Ensure both devices are updated to the latest DSM (DiskStation Manager) version.

Step 2: Install Hyper Backup on the Primary NAS

Hyper Backup is the application that will facilitate the backup process.

1. Log in to your primary Synology NAS.
2. Open the Package Center.
3. Search for and install Hyper Backup.

Practical Tips:

• Verify the installation by checking if Hyper Backup appears in your applications list.

Step 3: Set Up Hyper Backup Server on the Offsite NAS

To receive backups from the primary NAS, you must configure the Hyper Backup Server on the offsite NAS.

1. Log in to your offsite Synology NAS.
2. Open the Package Center.
3. Search for and install Hyper Backup Vault.
4. Open Hyper Backup Vault and enable it.

Practical Tips:

• Ensure that both NAS devices are connected to the internet for remote access.

Step 4: Configure DDNS for Remote Access

Using Dynamic Domain Name System (DDNS) will simplify the connection between the two NAS devices.

1. On the offsite NAS, go to Control Panel.
2. Select External Access and then DDNS.
3. Set up your DDNS service by choosing a provider and creating a hostname.

Practical Tips:

• Synology provides a free DDNS service; consider using it for ease of access.

Step 5: Create a Backup Task on the Primary NAS

Now that both NAS devices are set up, you can create a backup task.

1. Open Hyper Backup on the primary NAS.
2. Click on Create and select Data backup task.
3. Choose Remote NAS device as the backup destination.
4. Enter the DDNS hostname of the offsite NAS and the required credentials.

Practical Tips:

• Test the connection to ensure everything is set up correctly before proceeding.

Step 6: Select Backup Source and Configure Options

Determine what data you want to back up and configure the backup settings.

1. Choose the shared folders or applications you want to back up.
2. Set up the backup schedule and retention policy according to your needs.

Common Pitfalls to Avoid:

• Don't forget to enable encryption if you want to secure your backup data.
• Ensure that your backup schedule does not conflict with other operations on the NAS.

Step 7: Run the Backup Task

After configuring everything, it's time to start the backup process.

1. Review your settings and click on Apply.
2. Initiate the backup task manually or wait for the scheduled time.

Practical Tips:

• Monitor the backup process to ensure it completes successfully. Check logs for any errors.

Conclusion

By following these steps, you have successfully set up an offsite backup using Hyper Backup on your Synology NAS devices. Regularly check your backup status and consider testing your restore process occasionally to ensure your data's safety. For further learning, explore additional tutorials on advanced Hyper Backup features or Synology's other applications.